Recent content by sabalo

If I could redo the fuel tank replacement on my older 2320, I would bite the bullet and move the whole tank forward.

On my 2320 I've been running with a 22lb Lewmar claw and 50' of 1/4" chain. I wanted to add weight forward anyway, but have also found this setup to be pretty reliable for anchoring around the Channel Islands. No windlass, so I get minor grumbling from the deckhands that have to pull. But not...

Happens to me. I have top mount permatrim on my Suzuki DF250 and I seem to break the two bolts on the trailing edge of the cav plate. Not sure why.

I have an older 2320 with Suzuki 250 and 3-blade prop. I get 1.8-2.1 nmpg depending on conditions. But if I'm wound up to 5000 rpm I am moving 30 knots or better. Maybe you are pushing too much water and do have a motor height or trim issue to figure out.

Good choice. I'm very happy with the trailer WCT built for my 2320 last year.

I just replaced the original tank on my 1995 2320. 25 years old. :mrgreen:

I just cut a piece of starboard to fit the indentation and put it in there with 5200. So far so good.

Hi - I'd like to get pics if possible. Sent you a PM. Looking to put into my 97 2320. Did the 12" screen fit on your dash? Thanks. Craig.

I also put the 13.5" WEMA sender in my '97 2320.

Looks great!! I really want to do this on my 97 2320. I have a thru hull just below that is plumbed to this box that makes no sense...I guess it was intended to be some sort of fish well???? I plan to remove the thru hull and repair the hole. My only issue is that I always seem to get water...

I put a Suzuki DF 250 on my 1995 2320. I'm very happy with the choice. I was upgrading from a Yammie 200 SWS 2-stroke and it is a huge improvement. 2.5 nmpg vs. 1.7 or so. Lots more power, no smoke and much much quieter.

This year I repowered my 2320 with a Suzuki 250 and got the 6 year warranty. Now I'm getting notices addressed to creditors of Suzuki Motor Corp related to their bankruptcy filing. Anyone else get these and figure it out? Should I file to protect my warranty? I guess I should call the number...

I got some from my dealer. No problem...not too spensive. The old ones were cracked all to hell.

On my 1995 2320 I have the hatch in the same location. It has a rim drain with a 90 fitting and a small diameter hose that drains overboard on starboard side above the waterline. The drain plugs easily. No idea how to access the hull interior here to change plastic thru hull or hose if need...

Awesome, Brent. Congratulations! I'd love to check check out the install when you get her back. Looking great. Craig.