Recent content by saltyfish

I'd contact Michael Sasser at Coastal Canvas on Harkers Island.

Open back Parker FS on Fort Myers CL. I have no relation to the CL poster. The Open Back Parkers are rare. I'd own one if I could have another boat. Bryce

Any chance someone can share the track from Harkers Island to Cape Lookout Bight? I know I can try and follow another boat, but I'd rather have the track on my unit or phone. I've taken the passenger ferry skiff plenty of times over the past ten years, so I know there are shoals to avoid...

I like the t-top tent. Custom or off the shelf?

SOLD

Great shallow water boat when you don't want to take out your big Parker :D

2003 JB 17'6" bateau for sale, $9,500. Yamaha 50 hp 2-stroke, 290 hrs, mostly fresh water, motor is a perfect match for this hull, runs great. Well maintained, ethanol-free gas only + ring free. Lowrance GPS + FF, VHF radio, whip antenna. Lots of updates/improvements in the last few years: new...

If the radar and windlass are fully functional, you made out like a bandit! Enjoy.

Syringe approach sounds right. Was planning to use 18 gauge needles on a 10 ml syringe and cover drill hole with blue painters tape - and poke the needle through the tape. Turkey syringe sounds good, too. Thanks fellas. Bryce

Thanks Warthog. Bryce

Anybody on the water today and want to share a report? Thanks Bryce

I have 8-10 smallish transducer screw holes to fill in the transom of my 21SE. Will drill out slightly, clean with acetone, fill with epoxy. Loctite marine epoxy from Lowes or Home Depot ok, or do I need a product from West Marine? Doesn't seem like the blushing versus non-blushing epoxy...

Hello Gentlemen, I just bought the HDS7 carbon package (Structure Scan 3D) and wondering if anyone has mounted the two transducers with good outcome on a 21SE or other mod-V? Flat stern. I'm guessing starboard side, maybe 4-6" from the drain plug for the massive StructureScan skimmer, then 8-9...

Decided to adapt my "regular" boat cover to the T-top I had installed last year. I'm not exactly skilled at sewing (I did not know how to thread a bobbin), but pressed onward. End product came out OK. Materials (zipper, thread, straps, buckles, basting tape) all from Sailrite, and they have...

Jim and Warthog, I really appreciate the detailed replies. Might have another go at brush application. What concentration of isopropyl-OH seems to work for the preval sprayer? When you mentioned the green stuff, where you talking about the PVA wax or something else? Thanks again, Bryce