Search results

Pete way to go, and nice meeting you last week. Sounds like you had some action which is always good. Keith

I have 7 rod and reel combos for sale (3) Penn International II 50TW reels on Shakespeare USCSU 1159MH 5'9" 30-80# standup rods $350.00/ea (1) Penn International II 30SW 2sp on a Cape Fear BW3040TSU58 30-40# class 5'8" stand up $500.00 (1) Penn International II 30T on a Penn Tunastik 3960RCS...

Tom, you can use the web site www.resize2mail.com very simple and does a good job. keith

Before I sold my Parker, I tried to siphon the gas out at one time. I had no luck in putting a hose down the fill and into the tank. I even tried tubing as small as 1/4 inch ID. This was with the boat on a trailer. I may be wrong but with the boat in the water if possible at all, it will need to...

Running a Parker offshore should be no problem so long as you watch your fuel and the weather. I sold my 2530 last spring to another site member, but before that we ran 22 trips from Niantic to the Fishtails and the Dip area in four years. We had all safety gear etc and always planned for our...

Bryan, I have a fan and defroster in the basement. Will UPS to you on Thursday if I can locate tonight. Both can plug into the 12v receptacle behind the helm chair. Will pull your address from my files as well. Keith

Hi Bryan, email me at [email protected] and I should be able to forward you back some additional pics. As for the second station, i think there have been a few discussions here on Classic Parker, I have no direct knowlege on what it would cost though. Thanks, Keith

CT25 I tried to post a couple without luck. I do have a few posted in the archives. If you do a search under outlaw there is one from my initial post and two under lets see some pics. one of the helm and on the trailer. Wish I was more help...not the greatest with a computer, sorry. email me...

It is the boat in the JB Tackle catalog. That pic is from the 2005 Run and Gun tournament. We had a computer changeover at work and unfortunately I lost dozens of pics. I will try to recreate a few from my dead archives and post. Thanks , Keith

Boat and motors are 2003 , approx 525 hours. Boat is equiped with all standard options plus raw water washdown, galley package, dual spreader lights and rocket launcher (6). An additional 3 in gunel rod holders (total 7), two side mount and 9 cabin storage holders installed. Lee OH277T outrigger...

A) Outlaw B) Keith C) Outlaw D) 2003 E) 2530EC F) Yamaha 2003 G) Twin/F200 H) Niantic CT

John, the ones on my 2003 were stainless all the way to the blade itself, and that was plastic. Not sure what you have on your boat , but I got replacement stainless ones at Boats Inc, Niantic. Keith

Here is a pic of the yellowfin tuna, 65# that netted us second place in the J&B Tackle Run and Gun , Outboards only tournament, run out of Niantic , Ct. Keith

Thanks Pc, will do a search on THT and look for additional info. I have a spare batt tray that will fit the G31 batt and should be able to cut and mount as you did. I never run both so I guess I should be okay in that dept, always one on 1 and one on 2 and reverse the next time out. thanks...

Up until now my 2003 Parker has performed flawlessly. All maintenace done as required etc.... The last few trips the port battery has started showing signs of age. Batteries are original to the boat (460 hrs). Motors are twin F200's. Alternators are to spec per the tuneup this past spring...

Richard, my outriggers are mounted on the hard top and are double rigged Lee 16' XS poles. We run the outside from a Lee rod holder attached to the port and starboard side mounted handles and the inside from the forward holder in each side gunnel. The 4 rear rod holders are run to clips in the...

Hard to tell from the photo, wording is two part black over a brown base and fades from the top down. Keith

Same reasons for me that most have replied above, also reasonable fuel economy (2mpg at cruise in good conditions), plenty of fishing room for everyone, dry ride, and for me...the ability to fish offshore , all the way to the canyons on good days. Keith

Capt Ronnie, Parker warranties the parts and LABOR for one year, the Lenco warranty is 3 years on the parts only. Had to replace one last year and cs at Lenco was great. Supplied them with the serial number of the bad unit and had the replacement in three days. Install was very simple. Keith

Picture is from the Fishtails , mid September 2005. Went 6 for 6 on one pass. 12 total for the trip. Boat was just a tad messy.