Search results

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. POGE

    Bow Mounted Swivel Rod Holders on 2300 CC?

    Thinking adding more rod holders, I have eight in the gunnel now. Would like to add two , port , starboard up in the bow area as marked in picture . Any thoughts or examples on this ? LT Marine makes and good one with the backing plate having built in bolt holes so no tricky jujitsu maneuvers...
  2. POGE

    Simrad NSS EVO3S not marking fish

    Position over a known object below , example rock at 30 feet deep or the like, check the view and play with adjustments, side scan: position along known side view objects , like 20 yards out from a dock or pier , check the screen for read out and the settings options. Check on Evo3, the...
  3. POGE

    2300 DV bow storage insulated

    It is insulated. It’s a layer of spray type foam on fish boxes. Like most boats it’s a layer, think coated. Heat loss is from the hard lids uninsulated. Opening and closing a lot, and wind on ice, environmental heat. A piece of foil coated foam board does wonders if out for a long time or high...
  4. POGE

    After 15 years, modernizing the electronics

    OK, I have to deal with some family health issues and will save them for you. It might be last week in January .
  5. POGE

    After 15 years, modernizing the electronics

    I have a box of the items that were reomeved. The screens are in working order and both have the Nav cards. since it’s free, you’ll have to pick up. Scituate MA police and fire station As a general location for pick up.
  6. POGE

    After 15 years, modernizing the electronics

    Added a thru hull 1Kw and side scan. she’s ready to fish. just need spring.
  7. POGE

    Boat Tarps - Use a good DIY 'A'-Frame & $90 tarp versus shrink wrap @ $20 per foot - PER year!

    Agree,$450 a year to shrink wrap, ridiculous . Besides, old tarps can be cut for covering fire wood, painting drop clothes, lining the trunk of a 82’ Caddy for when payments are off 😎
  8. POGE

    Boat Tarps - Use a good DIY 'A'-Frame & $90 tarp versus shrink wrap @ $20 per foot - PER year!

    20 x 30 tarp for 2300CC, bungee cord every grommet, it’s tight and snow slides off, Old yogurt tubs on the rocket launchers, unpside down 5 gal buckets on t top roof, tarp last 3 years. Holds up in mini hurricanes we get call Nor eastahs . best of all, can get inside and it’s a man cave for...
  9. POGE

    Boat Wanted 23 Parker

    They are spec’s for it, why not ?
  10. POGE

    Thru hull transducer for 2300CC: location and degree tilt question

    the fine details per usual, thank you
  11. POGE

    Thru hull transducer for 2300CC: location and degree tilt question

    Very helpful , thank you for info and taking time to post.
  12. POGE

    Thru-hull locations on 2300DVCC

    This is very helpful, I am going with 1KW HW Chirp, and a struture/ side scan
  13. POGE

    After 15 years, modernizing the electronics

    when I purchased my 2008 CC I added two A65 Raymarine screens and two independent Sounders. Still works today and did very well for fishing, I,learned what they read back and they did pretty decent. I came from a smaller boat with the fish symbol type of sounder and old Lowran system. I Nav by...
  14. POGE

    Thru hull transducer for 2300CC: location and degree tilt question

    Thinking of adding a thru hull transducer to my 2300CC. Suggestions for best placement and what degree tilt ? 12* or 20* seem to be the common offerings.
  15. POGE

    23se windshield height

    I added a mat made of layers to give an extra 2” or so. Dri Deck on the bottom then cut foam flooring mat.
  16. POGE

    Parker 1801 drain plug

    I had a stuck plug , brass on brass, someone tweaked it good and tight. It saves a lot of time just to replace the whole assembly. 3 screws, load back up with epox or 5200, new flange with plug about $20. I have a huge Channel Lock brand wrench for sale cheap 😂
  17. POGE

    Fuel gauge stuck

    https://kus-usa.com/application-solutions/marine/?utm_term=&utm_campaign=Performance+Max_Top+Sellers&utm_source=adwords&utm_medium=ppc&hsa_acc=6114858370&hsa_cam=20119366543&hsa_grp=&hsa_ad=&hsa_src=x&hsa_tgt=&hsa_kw=&hsa_mt=&hsa_net=adwords&hsa_ver=3&gad=1&gclid=EAIaIQobChMImaOl6PCBgAMVReLICh1o3...
  18. POGE

    Fuel gauge stuck

    It’s straight forward and inexpensive replacement for sending unit. My factory sending unit was odd at best, a circuit board was in the sending tube soaking in all that fuel. Did the same thing you stated in read outs. it acted like a stuck float but it’s the unit. See KUS Marine products.
  19. POGE

    Largest swells your Parker can take

    2300 CC. Slow rollers, 7’ head on , 4’ from the sides And a flowing sea.
Back
Top