Bottom Painting

[rfbcody1027]

I had my Parker 2520 SC Soda blasted and I want to paint it now is it ok to put 6 or 7 coats of barrier coats and then 2 or 3 coats of Interlux Micron Extra .I don't want to use the hard bottom paint do you guys think this would be OK the boat gets used a lot. I keep it in a slip in Watch Hill RI. Thanks Ron

 

[Bryan 2530]

Good plan!
That is the typical installation of the barriercaot/ablative paint coating. I did it on my Whitewater 8 years ago and it works great. I would suggest a warning coat of a diiferent color other than the finished coat to signify when it is getting thin. I did blue then two coats of shark white. Every year I buy a quart and retouch the spots that look thin. very rarley do I see blue. Good luck. Check the link at the bottom of my signature. I explained it in the listing. Some pictures too.