Cabin Rod holders, livewell,

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pparke

Member
Joined
Jun 19, 2006
Messages
23
Reaction score
0
I need some advice on what type and what location to mount some interior rod holders on my 2510. I was thinking somewhere on the ceiling or on the sides near the ceiling. How thick is the fiberglass and what size attaching screws can be used without going through. Second project is to install a livewell. I understand that the newer models have one located under the port seat. Is this a good location and can the storage area that is there now be retrofitted. Last for now is preformance. The boat came with a standard OEM stainless wheel. What is the best cruise for mpg and what numbers(mph) should I expect at 3500, 4000, 4500 rpm.
Thanks, Paul
 
pparke":14o26je3 said:
Last for now is preformance. The boat came with a standard OEM stainless wheel. What is the best cruise for mpg and what numbers(mph) should I expect at 3500, 4000, 4500 rpm.
Thanks, Paul
Paul:

What motor/HP ? What prop, 15x17" ?
 
Dale, The motor is a 225 four stroke yamaha. I will check on the pitch. Paul
 
Back
Top