F250 mounting height question on my '97 2310

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bent monkey

Well-known member
Supporting Member
Joined
Apr 29, 2008
Messages
83
Reaction score
1
Location
Redondo Beach, CA
I've had my 2310 for 24 years and a while back I swapped out my OX66 225 HP for an F250 and while helping me out with installing some electronic upgrades my buddy noticed that the anti-ventilation plate was above the keel and I am wondering if the motor is installed at the correct height.

We grabbed a 2x4 out of my truck and put it against the hull and took the attached pics.
In one of the pics you can see that the motor can be lowered by one last available mounting hole and want to ask if I should have it lowered and if so will that be enough?

When we were commissioning the new electronics the other day he was at the helm and noticed that the boat does horrible in reverse which initially got him thinking.something isn't right and after looking at it on the trailer we're thinking it's likely because the water is being pushed against the transom instead of under the hull.

The motor is a 2007 LF250TXR and at 4600 RPM's the boat will do about 30 knots as is.

On a side note, we swapped out the Bennett tabs for the Lenco electric tabs and their auto glide system which controls the roll/pitch automatically and the difference is night and day, quicker hole shot, on plane quicker and
adjusts when people are moving around on the boat.

Appreciate any feedback!
 

Attachments

  • IMG_4908.jpg
    IMG_4908.jpg
    4.4 MB · Views: 0
  • IMG_4909.jpg
    IMG_4909.jpg
    4.4 MB · Views: 0
  • IMG_4910.jpg
    IMG_4910.jpg
    4.2 MB · Views: 0
  • IMG_4911.jpg
    IMG_4911.jpg
    2.3 MB · Views: 0
  • IMG_4912.jpg
    IMG_4912.jpg
    3.3 MB · Views: 0
  • IMG_4904.jpg
    IMG_4904.jpg
    3.6 MB · Views: 0
  • IMG_4905.jpg
    IMG_4905.jpg
    3.8 MB · Views: 0
  • IMG_4906.jpg
    IMG_4906.jpg
    3.1 MB · Views: 0
  • IMG_4907.jpg
    IMG_4907.jpg
    4.6 MB · Views: 0
Back
Top