SALT WATER WASHDOWN

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Robert Cibran

Well-known member
Joined
May 10, 2007
Messages
293
Reaction score
2
Location
Miami,Florida
I HAVE THE OEM SALTWATER WASHDOWN WHICH CAME ON THE 2006 2300 DVCC,THE SYSTEM SEAMS TO HAVE AIR AS I'M GETTING WEAK STREAM AND AIR AT SAME TIME,ANYONE KNOW HOW TO FIX THIS PROBLEM,THANKS.

ROBERT
 
I had a similar problem with my RW and bait well pump. Both are on the same through hull fitting. Seemed to be from air in the line that I assume was from taking the boat (thus the through hull fitting) out of the water with the primary ball valvere open. I repositioned the intake hose completely below waterline and the problem disappeared.
 
if same through hull feeds both bait feel and wash down, you can check the seal of the bait feel pump head to make sure on tight. Check any clamps too ????
 
Back
Top