2007 2320 w/ 250 yamaha. It preformed well, ended up with a powetech 4blade, they were nearly identical with the powertech having a slight edge when loaded heavy.
Mercury Rev4 14 5/8'" 17P RH SS with flo torque hub and Solas yamaha hub. $350 +shipping. Prop is in perfect condition, purchased new and was used for less than a month when I was prop testing on a Yamaha 250.
Let me know if you have any questions. Have pictures will be attaching.
2.5 mpg is right if I have 2 people, clean bottom and 1/2 tank of fuel..... When I'm loaded with 150 gallons of fuel, 5-6 people, bottom less than perfect its more like 2
When I tested props 2 guys 1/2 tank of fuel (merc rev4 17p prop) and a clean bottom I get 13.4 gph 4200RPM speed is 28-29 mph and WOT is 5500 and 41-42mph....
When Im loaded down with 5-6 guys its more like 15 - 16 gph 4400 RPM to get 26mph
As my bottom got dirty this year the fuel burn was...
I use a small tuna bag with 20# of ice and put in the transom fish box when i don't need all the room. Works well, i also wanted to come up with a divider system but, I came to the conclusion the only thing I would have been satisfied with would be rather permanent.
I had a Yamaha F250 on my 2007 2320 and I have a Yamaha 300 on my 2011 2520... I don't have a lot of expertise on the 225's but, I've heard they were slightly under powered for a 225 where some say the 250 is closer to 260hp.... in terms of economy, I think the extra HP will probably move the...
Does anyone know if Parker runs an RF ground in the factory wiring harness? I can't find one, apparently I need it for my RADAR install... Boat is a 2011 2520.
Generally yes, the tabs are to change the attitude of the ride, keep bow down when necessary, and level the ride if weight isnt evenly distributed. Watch having too much of those big tabs deployed in a big following sea.
Anyone else install these drawers with just screws? Its awfully heavy and I think thru bolting is the way to go but its basically impossible without cutting something.