Search results

2007 2320 w/ 250 yamaha. It preformed well, ended up with a powetech 4blade, they were nearly identical with the powertech having a slight edge when loaded heavy.

Mercury Rev4 14 5/8'" 17P RH SS with flo torque hub and Solas yamaha hub. $350 +shipping. Prop is in perfect condition, purchased new and was used for less than a month when I was prop testing on a Yamaha 250. Let me know if you have any questions. Have pictures will be attaching.

Reduced

Still for Sale

For Sale 2011 Parker 2520XL w/ Yamaha F300 430 hrs and Tandem Axle Trailer Fully Loaded Electronics Package - Raymarine E120 Wide Hybrid Touch Screen GPS / FishFinder / Multi-Function Display - Raymarine HD Color 4KW Radome Radar - Raymarine ST6200 AutoPilot - Raymarine DSM 300 Sounder w/ 1kw...

2.5 mpg is right if I have 2 people, clean bottom and 1/2 tank of fuel..... When I'm loaded with 150 gallons of fuel, 5-6 people, bottom less than perfect its more like 2

When I tested props 2 guys 1/2 tank of fuel (merc rev4 17p prop) and a clean bottom I get 13.4 gph 4200RPM speed is 28-29 mph and WOT is 5500 and 41-42mph.... When Im loaded down with 5-6 guys its more like 15 - 16 gph 4400 RPM to get 26mph As my bottom got dirty this year the fuel burn was...

I have a single yama 300 on mine and its a beast.... Should suit you fine.... I run fishing charters for 4-6 people so i'm always running heavy.

I use a small tuna bag with 20# of ice and put in the transom fish box when i don't need all the room. Works well, i also wanted to come up with a divider system but, I came to the conclusion the only thing I would have been satisfied with would be rather permanent.

I had a Yamaha F250 on my 2007 2320 and I have a Yamaha 300 on my 2011 2520... I don't have a lot of expertise on the 225's but, I've heard they were slightly under powered for a 225 where some say the 250 is closer to 260hp.... in terms of economy, I think the extra HP will probably move the...

Does anyone know if Parker runs an RF ground in the factory wiring harness? I can't find one, apparently I need it for my RADAR install... Boat is a 2011 2520.

Generally yes, the tabs are to change the attitude of the ride, keep bow down when necessary, and level the ride if weight isnt evenly distributed. Watch having too much of those big tabs deployed in a big following sea.

Anyone else install these drawers with just screws? Its awfully heavy and I think thru bolting is the way to go but its basically impossible without cutting something.

Deep V or Mod V ?

I recently sold my 2007 2320 with a Yamaha 250hp and bought a 2011 2520 XL with a Yamaha 300hp. When propped correctly I"m pretty surprised how similar the fuel burn between the Deep Vee 2320 and Modified V 2520 XL actually are. On the 2320 at 4600 RPM with a load of 4 guys my fuel burn would...

Turns out I had the "Dual Watch" feature turned on so the pause I was hearing was the unit checking the other channel... I turned off dual watch and it now sounds normal...Thanks Bryan

Recently installed a Standard Horizion VHF and when receiving a transmission there is a noticeable dead spot basically every 1 second. It does it on every channel but it is very noticeable on a WX channel where there is a constant broadcast. The pause or dead spot is rhythmic and consistent...

The circular inspection hatch on my 2520 is a foot or so behind the pilot house door and all I see through that hatch is the fuel cell.

While we wait for Sandy......I've read that most 2520's are equiped with a forward bilge pump, where would one access this pump?