Search results

DO NOT PUT ELECTRICAL DEVICES LIKE CAMERAS INTO YOUR TANK !!!! YOU HAVE AN EXPOLISVE ENVIORNMENT IN THERE !

I replaced the tilt trim switch on a yammie a while back that was acting strange and it resolve the problem... However sounds like you may have damaged some part of the "brain". Also cant help wondering about your emergency kill switch ...

Stand on the cavitation plate of your OB and bounce up and down. If you see that gap in the transom flexing badly, I would replace the transom. Otherwise fill with epoxy/resin. Grind and cap the gap off with glass reinforced resin.

They look like "fish-eyes" in the bottom paint.

I had a 2510 (1999) that had some cool hardware holding the helm console shut. They were a sort of rotary, draw-tight latch. Does anybody know who make them or where you can find them ? Thanks ! Phil

You can strap the motor down to a pallet and ship it common carrier. Is it a 25 or 30 inch shaft? If it came off the transom its 30. I may be interested if its a 25. I had a 99 with that motor. I sold it used back in 2007. GLWS

Looks like it will be a Spring sale !

Leave you're PH door and front windows open. I leave my back curtain off for the same reason.

bump with updated info.

http://nh.craigslist.org/boa/4159173461.html Original owner. Repowered with Zuke in 2008. Galvanized roller trailer serviced in 2011 (brakes & bearings). New canvas enclosure in 2008. Engine has just under 800 hours. Cruise 22kts, WOT 35kts. Very quick out of the hole. Loves to troll...

No rod holders though

Thanks Dale. It is the factory wiring which served several pumps for years of service when I used the boat far more. The wiring is very heavy. PHil

I've been through 6 pumps in the past 2 seasons. Both diaphragm and centrifugal. Mostly I use the pump intermittently to keep macs, herring, lobster alive. In some cases the pumps don't last more than 1 month before they fail to operate. I'm using $200.00 pumps not the cheapest on the...

I had that issue a few years ago. It was a difficult-to-see clog in the vent. I updated to the new style vent. Solved !

I would caution against using silicone sealant on the transom. Silicone is a nice, soft water proof filler, but it has limited adhesion and no structural effect. If I were simply filling the space I would use thickened epoxy. I have a 99 with a big DF 250 on the transom and there are no...

Perfect. Thanks !

My Furuno 582 (almost 20 years old) died on me yesterday. If anybody has a 582 or 582 L for sale please drop me an email. [email protected]

For deep repairs I thicken the Parker Gel-Coat up into a paste with Cab-O-Sil TS 720. It works pretty well.

Does anybody know what angle bracket will fit a 2510 DV ?

You will find that having only two will be frustrating when the balloons begin to "walk" around. 6 is ideal, with two on the stern.