Help Support Classic Parker Boat Forum:
-
-
BBlueghost93 replied to the thread Wet foam.Great info! My Parker has the battery shelf above the tube that runs across the bottom of the boat. Do you think I need to drill holes...
-
-
BBlueghost93 replied to the thread Wet foam.Mine doesn’t have that ridge along the rim like yours. If mine did that would be a lot better design. I’m going to glue in the new ones...
-
BBlueghost93 replied to the thread Deck hatches.Purchased the screw in type 6”. Posted in the wrong thread by accident. Will make them fit the hole and then seal.
-
BBlueghost93 replied to the thread Wet foam.Picked up some 6” ones at the marine exchange today. Looks like I gotta carve the hole out another 1/4” for them to fit but they should...
-
-
BBlueghost93 replied to the thread Deck hatches.Mine are more like a 5.5 center area and 6.5 outside diameter including the hold down ring. I’ll post measurements tomorrow.
-
BBlueghost93 replied to the thread Deck hatches.That is correct 😂 mainly because I’m 45 min from the boat and read on here what everyone used so now I’ll go measure.
-
BBlueghost93 replied to the thread Deck hatches.Yes on my boat it’s bigger than a 4 inch. I ordered the 4 inch ones and they showed up and the outer ring with the screw holes in it is...
-
BBlueghost93 replied to the thread Wet foam.Well as I stated before the boat bilhe had filled up with fresh rainwater and spilled over the top into the fuel tank area. I had a fan...
-
-
BBlueghost93 replied to the thread Deck hatches.I actually have those and the ones on the deck are way bigger. Those ones fit the back corners for the wires run from the bilge up under...
-
BTrying to replace the two round deck hatches on my 08 2320. I’ve seen people use a aluminum one for the bilge but what’s the best...
-
BBlueghost93 replied to the thread Trailer side Bunks, Pros/Cons.I have guide bunks that have an adjuster bolt so they can be moved out further or completely for washing etc.
-
-
BBlueghost93 replied to the thread Adding Second Helm.@josh. What he said ^ I also had twin stations with cables and man did it suck. Never could get the second station on this boat...
-
BBlueghost93 replied to the thread Adding Second Helm.From my understanding they are no longer making the previous model which is why I went all new. You might be able to find the previous...
-
BBilge blowers are generally designed to blow air in rather than suck out so that if there are flammable fumes they will get pushed out...
-
BBlueghost93 replied to the thread 2520 with 500 HP.After re-reading it three times if you’re referring to upgrade as an a brand new boat vs repower no you cannot get bigger than twin 200s...
-
-
Loading…
-
Loading…
