Bodick93

I just finished my rodholder bucket for my 2320. 1 1/4" PVC in plasticized concrete (I have a nail through the PVC at the bottom to...

Captain Maureen, my wife's biggest striper on a bluebird day. Released fish all morning this size. This one we couldn't revive and is on...

72 in bluefin

Please post a picture. The transoms vary. On my 19, I "recaulked" the seam with Lifeseal. Once set up I removed the screws one at a...

Man, you REALLY need some pics inside. I am dying to see that windlass setup.

I am looking at getting a BOTE inflatable couch for my transom seat. They review to be really tough, then basically go away when you...

The long-time plant manager retired last year but I bet many of the old guard employees are still there. Supply chain issues with parts...

Where are you, what is your beam, how long is the top, and are the bows stainless or aluminum? Does it have a storage sock?

Careful on the tightening when through bolting....The holes like to crack at the countersink.

Bear with me. I did something similar year ago getting a backing plate installed. Going to take two people *if* you can see the area...

I use zip ties in situations like this. Cut a zip tie into 1/2" pieces. Hold the zip tie in the hole then insert and screw in the the...

Nice looking rig! Agree with tomc, most likely the float. Most of us have been through this. Get that phone figured out so we can see...

On THT a while back, someone had weak flow from the bilge pump, and someone else suggested a backflush with the garden hose. It then...

That job would suck! Even if applied correctly, I can only see it hurting resale if one owner didn't try to keep it up... Like I...