That is a good idea. My lines are fine inside the boat, just getting worn/frayed at the swim platform. Do you happen to have a link to the fittings you used? I see a chrome one online, but would prefer something more durable if available.
My current line set has worn through slightly where...
Does anyone know the length of the hydraulic steering lines required for a 2004 2300dv with a bracket?
Would like to have the new ones in hand before beginning the replacement. Thanks.
I guess the tab and actuator are still centered on one another, but they end up not being in the ideal distance from the keel. It is not worth it to me to relocate the whole actuator/tab to get them in the perfect/ideal location
I have a 2004 2300dv with a F300 on a bracket and was having the same issues with keeping the nose down in choppy seas. I recently replaced the 12x12 tabs with 12x18 tabs and left the actuators in the same spot. Made a world of difference. Response is immediate and not as much bounce in chop...
2004 2300dv with F300 on Armstrong bracket... I recently moved the motor up so there is only one hole remaining to raise up further. Tested the boat out and rpm at wot is 5500 and speed is 50mph. Anti vent plate is right at the surface so seems good when running/cruise.
When at trolling...
I was directed to our local dealer to get gel coat recently and so far have not had much luck getting a response. Would love to be able to get it directly from the builder.