Recent content by Ponr

Thanks Warthog! Well I went to work on the boat to get ready for the season and the bottom bolt is maxed out touching the bottom of the midsection mount on the transom. On the top mounting hole I’m in the 2nd hole.

Here is a video I took last year

I had moved it up a hole already. My anti cavitation plate is 1/2” above the V on the bottom of the hull. I mentioned having a cobia tower as it has the extra weight up top. And When cornering I do hear the engine tone change. I didn’t know that with my other boats as When I bought this one it...

I have a cobia tower on my 21se and looking to try and find the proper height for the outboard. Anyone else in the group with the same setup and which hole is yours mounted on? mine is on the second from the top. I was running a Yamaha black sst 17p and getting 5400 RPM. added a permatrim...

How many bolts do you have holding the plate down?

Any issues with you using the 8AWG cable? I have some laying around and want to use it, but people suggest 4AWG for 20ft run.

If anyone has leads to a used TM please let me know I would buy new but with all these unexpected medical bills with my son I wanted to see if there is anything out there. Thanks and tight lines!

Has anyone replace a sending unit on these? Looks like a pain. due to age I’m afraid to loosen the bolts not sure if Itls seized. I head a guy at work say you be careful as there maybe river nut underneath. He had a few stripped threads. Anyone know what type of insert they used for the...

Help.. I laid down CSM wetted it down then laid 1708 but got some air pockets that I couldn’t work out. Not sure what to do at the moment. I’m new to fiberglass work and tried my best at it thanks

Have you started the glass work yet?

Nice tank. Mine looks like crap to be honest. How much was yours?mine was $1500 for 3/16”

What did you use to coat your tank? my tank is being built and looking to coat it.

What type of glass used to repair the cutout? and what type of resin is he using? I"m waiting for my tank to be built and will put back together soon I hope.

Hello I’m a newbie with fiberglass and not sure what I’m doing and what I need but I am handy. I"m cutting the floor on my boat to get the gas tank out and would like to know what I would need to glass the floor back in place. I"m going to put some support along the stingers and screw the...

ANYFISH I’m in Richmond too. Who built your fuel tank?going to start cutting out the floor. What model boat do you have? I’m trying to make sure I cut the right area. Dis you use a drawing for your cutout?