tomc585

All one has to do is look at the spec's on the Factory site. Suzuki fills the nitch that Yamaha leaves behind with a DF-140 at a...

I was looking for the one that goes on top of the console

Plug the hole(s) and drill with a hole saw. When I repaired mine I used a piece of 3/4 plywood and clamped it to the transom to cover...

Where's the rest of the boat? I could use an electronics box.

Here is the newest listing for a 2010 1801 w/200 E Tec and trailer Ends 11/30/2023 10:27:00am...

Sold $10,050.00

https://recoup.bid.assetworks.com/bid/f?p=2501:4001::::4001:P4001_ITEM_ID,P4001_AUCTION_ID,P4001_MAIN_IMAGE_ORDER_ID,AI_STORE:26249,31411...

My bad, I thought I posted the SE drawing. I'll look to see if I have the correct drawing.

I have been toying with a similar project on my 18'. Looking at the the stringer drawings you should have what looks like a nice "void"...

grind fill fish

I always wanted one of those

I teepee my boat and use a generic cover ($250) More than 5 years old and still in good shape. No puddles is the key. It all comes down...

The problem with a replacements is the snaps may not be in the same exact locations.

That's what I love about mine. Keep It Simple Stupid.

Upper 70's tomorrow. Keep it in the water till then!