Search results

I have a 2520mv with a 2010 225hp with 175 hrs and love it so far great on fuel and I have the same cruise I just lost some on top end but I also stepped down from a merc 250 efi. Idling speed it only uses .6 gallon per hour where my other one used 2.5-3.5 gph and I do alot of idling between...

I intalled the factory kit on mine in 2000 my boat was a 1999 and kit back then was 600.00 it consists of the pulpit, the rail extension two cleats and seperate running lights you have to cut the bow rail with a tubing cutter and the extention will slide into it then it comes with two sleaves...

If anybody is interested in pictures of the bench seat that captain slab mentioned I have his pictures but I cant shrink them down small enough to post them on here if you are interested pm me With your e-mail address and I will email them directly to you Thanks

sent pm

I am interested please email me at [email protected] also check your pm Thanks

Get the 23' It is a much better ride and more balanced boat. The two hulls are exactly the same on the outside the 23 was made first and was a great design then they simply cut 2 feet off the back of the mold and made the 21. As far as the 23 being to much boat, It will go anywhere that the 21...

It is easy to tell the master it will have 4 cable ends hooked to it which should be the back helm. The slave will only have two hooked up to it. As far as the dealer install thing Just because they were dealer installed doesn't mean they were done right. You have to figure that this is probably...

You only have 24 hours of use but probably 8700+ hours of sitting up which will probably become more of your enemy than use. especially if you have just the plain series of teleflex cables and not the supremes or extremes. In your case I wonder if your boat came rigged with only one station and...

You probably have a bad cable if you can't move it effortlessly with two fingers then it is bad. The morse controll that parker mostly use will also wear the 90 degree arm that screws onto the cable and then attaches it to the control via a cotter pin. when this happens it will still start to...

Thanks for all the replys and pics I think I got the answer I needed

Thanks for the pictures dcunniff but I need the pictures from an ez loader trailer because that is what I have. PORKCHUNKER if you could post those pictures I would greatly appreciate it. Thanks

Does anybody have this setup and if so can you post some pics of it. I am converting my 48 roller ez to 64 roller and I would like to see how the front quad roller assemblies are set up to the hull to save me some time and error in adjusting mine. Thanks

I noticed that parker has started producing their commercial model again. A 21',23' and a 25' all of them are open console style hulls that are bare, no console, rigging or motor just a wide open hull. They used to make them years ago but stopped when they got to busy so I guess now they figure...

He's been retired for about 15 years but he fished almost that much before he retired. I thought of one more boat carmine put a cabin on it was an 1985 centerconsole souwester

I have had one since 1999 they are great machines very easy to operate and user friendly. I never had one problem with mine.

This boat is a 1989 2110 mod v that had a cabin built on it by carmine boat builders in crisfield which just went bankrupt this summer I know the owner of the boat pretty well. Carmine also did a 2310 mod v the same year both boats are located in the princess anne md area. The one in the picture...