Search results

Did you ever find this information? mind popped off at 5000' of water...

110 miles Parker 110. West side of Cortez bank. Great weather forecasted for 3 days

Talked to brian yesterday, seems like a cool guy. Will be ordering as soon as i take some measurements.

Looking for a set of coaming pads or if anybody can point me to the right direction. Much appreciated.

Tested the new prop out and got me out of the hole sooooo much better. However, I will still be putting the motor to the middle hole after talking to a parker dealer & Suzuki master mechanic this morning. I was able to spin 6000~ RPM fully weighed down as if I was going fishing, bait tank...

I'm dealing with the same thing and just received another prop 3x15x21..Will be running today. Mounted on the second hole from the top. another user here had his in the middle with the prop mentioned (3x15x21) Will test with 2 passengers sitting in the back and bait tank running. If this...

Marine Cup Holders, Rod Holders, and Deck Hardware | Prime Industries Marine Does the original ones

Can you write down the process you go through from step a-z? you've done an amazing job maintaining her pearly.

A dremel will take that out like slicing a cake

I pulled some pictures as this is my 1996 and how it’s setup for me

Is there any direct better latches I can possibly buy for the window? I keep having an issue where windows keep opening. If anything I’d like to keep it perm locked.

Were you able to get out on a field test?

If you can let me know what prop you're running and what position it's mounted when given the chance I would greatly appreciate it to compare what I have. As far as performance, I feel i really need to hit the throttle to get onto plane. My last engine was a 225 with a permatrim installed and...

Wow twins on the boat! I just put a Suzuki on my boat and a tank May i ask what hole you mounted the Suzuki on? And what prop you’re running? Im getting a little bit of ventilation on the motor when barely trimmed up

just put a new to me trailer that tom rogers sold me aluminum. reach out to him on bdoutdoors (towerfab) he has great trailers

14.4K OTD Suzuki 200A here in California. Finished two weeks ago

Thanks guys andwers a lot of my questions! Im about fed up with this old panel and needs a major refreshment that I see coming in the near future...

Looking at replacing the pump on my Parker 2110. Instructions require a 20AMP breaker or fuse. My last pump was routed to the Parker dashboard up in front with the switch to turn on or off and the reset button. Now I know the little black button is the breaker system for the parallel switch if...

One thing I can think of is there is a possibility that your engine is not at the correct engine height? check that you're planing tabs/cavitation tabs are flush with the bottom of the boat when the motor is trimmed all the way down.