2520 steering wheel

[stripbait]

hi guys I have a 2013 2520xl looking to change out steering wheel with a ebson wheel with knob what size is the factory wheel thanks for any infor

 

[warthog5]

Usually a 15 1/2...You will need the 5/8 nut for the hyd steering.

It will steer fine with a 13 1/2 wheel.

 

[stripbait]

warthog so a 13 inch is plenty of wheel for that boat thanks for ur infor

 

[stripbait]

Edson list only 13inch 141/2 17

 

[TWOBOATER]

Can't you install a knob on your present wheel?? They're pretty universal-fit.

 

[warthog5]

Personally I'd opt for a knock off...

Ebay for $100 Stainless...BUT be sure the spinner is in the rim.......NOT in the spoke....It does make a difference there on a 13 1/2in wheel.

This is the one I have on my Crows Nest.

http://www.ebay.com/itm/13-1-2-Stainles ... f6&vxp=mtr

http://www.ebay.com/itm/Stainless-Steel ... c4&vxp=mtr

Note the spinner in the spoke. Do Not buy this unit...You can feel the extra effort it will take to steer it. Been there done that by mistake and not paying attention in the past.

 

[stripbait]

thanks for ur help