Captainsauls
Well-known member
I bought this boat a few years ago and completely rebuilt it.
The original deck hand some soft spots so I gutted the boat to the hull. The engine and outdrive were also removed at this time.
the entire deck was replaced (glassed on both sides)
1 stringer and a few bulkheads were also replaced
a new fuel tank was purchased and epoxy coated and mounted on tabs vs foam. The new tank was a direct replacement from the factory with an added pick up and return for the generator.
I knew I wanted a generator so we installed chase pipes for the exhaust and fuel lines while the deck was open.
all water logged foam was removed.
all wiring was removed
all work done by Paul Flag at Professional Fiberglass in Panama City FL
once all the structural work was complete
The outdrive was rebuilt by Paul’s Marine in Panama City FL
The engine was tuned up and reinstalled by EMT in Panama City. A new wiring harness was added to replace the old worn one
The generator was purchased from Next Generation Power (3.5 KW) in their sound prof enclosure.
I had a custom built box added to the deck to house the generator and double as a seat. This was done by Miller Marine Yachts when they installed the generator. Shore power and selector switch also installed at this time.
Eric Harbaugh with Brenton Boat works complete the awlgrip paint job. Sea foam hull with bright white top sides and cock pit.
eric also built a custom bench seat and helm box at that time inside the pilot house
garmins 7612xsv with HD radar and airmar flush mount 1kw transducer and new ICOM VHFinstalled by Scott Barnes at Panhandle Marine Controls
general info and parts list
engine Volvo AD41p-a burns 9gph at 20-21kts LOADED 25-27 WOT
generator 3.5 KW next Gen Power with enclosure
All LED lighting rigid spreaders and Perko running lights seablaze X underwater lights
Dometic roof mount AC (will freeze you to death!)
new bennet trim tab pump and actuators
Tandom axle trailer included in the sale. New springs and hardware will have new hubs within 4 weeks.
I poured my heart and soul into this boat. It is just time for me to move back into something bigger and faster.
I’m sure I’m missing something PM with questions or text josh 850-258-5353
55k obo
problems ith the boat.... the front windows leak a little....
.jpg[/IMG]
pg[/IMG].jpg[/IMG]
Sent from my iPhone using Tapatalk
The original deck hand some soft spots so I gutted the boat to the hull. The engine and outdrive were also removed at this time.
the entire deck was replaced (glassed on both sides)
1 stringer and a few bulkheads were also replaced
a new fuel tank was purchased and epoxy coated and mounted on tabs vs foam. The new tank was a direct replacement from the factory with an added pick up and return for the generator.
I knew I wanted a generator so we installed chase pipes for the exhaust and fuel lines while the deck was open.
all water logged foam was removed.
all wiring was removed
all work done by Paul Flag at Professional Fiberglass in Panama City FL
once all the structural work was complete
The outdrive was rebuilt by Paul’s Marine in Panama City FL
The engine was tuned up and reinstalled by EMT in Panama City. A new wiring harness was added to replace the old worn one
The generator was purchased from Next Generation Power (3.5 KW) in their sound prof enclosure.
I had a custom built box added to the deck to house the generator and double as a seat. This was done by Miller Marine Yachts when they installed the generator. Shore power and selector switch also installed at this time.
Eric Harbaugh with Brenton Boat works complete the awlgrip paint job. Sea foam hull with bright white top sides and cock pit.
eric also built a custom bench seat and helm box at that time inside the pilot house
garmins 7612xsv with HD radar and airmar flush mount 1kw transducer and new ICOM VHFinstalled by Scott Barnes at Panhandle Marine Controls
general info and parts list
engine Volvo AD41p-a burns 9gph at 20-21kts LOADED 25-27 WOT
generator 3.5 KW next Gen Power with enclosure
All LED lighting rigid spreaders and Perko running lights seablaze X underwater lights
Dometic roof mount AC (will freeze you to death!)
new bennet trim tab pump and actuators
Tandom axle trailer included in the sale. New springs and hardware will have new hubs within 4 weeks.
I poured my heart and soul into this boat. It is just time for me to move back into something bigger and faster.
I’m sure I’m missing something PM with questions or text josh 850-258-5353
55k obo
problems ith the boat.... the front windows leak a little....
Sent from my iPhone using Tapatalk
