Engine/Fuel Data installed on a Garmin 4008 rev. 5.0

[alb1661]

I have a 2007 21SE with a 150 4s Yamaha. I installed a maretron (mare-002) interconnect cable from the Yamaha Command Link Terminal (open device port) to a Garmin nmea 2000 backbone cable (010-11076-00) to the nmea 2000 port on the Garmin 4008. I now get all fuel and engine data on my Garmin. It's just plug and play and works great.

Before I did this ,I spoke to Eric at Parker, he advised me it was pretty simple to do and it was! Thanks Eric.

Steve