I have the 2120 sport cabin with the F150. Motor bolts are in the second hole from the top. Performance is just about what Yamaha shows on their tests with wide open at 5400-5500 rpm with either the 13 3/4 X 17 prop or the 14 1/4 X 16. Max rpm for the engine is 6000.
Has anyone with the 2120 raised the engine height and if so what was the change in performance and with what prop. There are two holes below the second hole with a 3/4 inch seperation so the engine can be raised a maximun of 1 1/2 inches. Parker advised leaving it where it was.
I noticed folks with larger Parkers have had some success in raising their engines.
Thanks in advance
Ray
Has anyone with the 2120 raised the engine height and if so what was the change in performance and with what prop. There are two holes below the second hole with a 3/4 inch seperation so the engine can be raised a maximun of 1 1/2 inches. Parker advised leaving it where it was.
I noticed folks with larger Parkers have had some success in raising their engines.
Thanks in advance
Ray
