Fuel Sending Unit help

Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

miky2884

Well-known member
Joined
Jul 27, 2010
Messages
1,469
Reaction score
0
Location
Westbrook CT
I am needing to replace the fuel sending unit on my 2000 2320. I removed it last night and took a measurement of the bar which is 12in. I have a 150 gallon tank. Does anyone know which sending unit I need. I was not able top read the part number on the unit. Any help is appreciated!

Mike
 
The link you sent is the one I have now. I measured the rod of the unit and it measured right around 12 inches....... So do I get the 11 inch or the 13inch unit??
 
. .....Mike when I did my unit I bought it right from WEMA because they do 1/2" sizes. . ...I have the 13.5" in my tank (1999 2320 with 150 gallon tank 14.5" deep). ........



 

Attachments

  • wema%207.JPG
    wema%207.JPG
    141.2 KB · Views: 214
I measured the rod of the unit and it measured right around 12 inches....... So do I get the 11 inch or the 13inch unit??


STOP! That info is useless.....Put it out of your brain.

Measure the tank depth thru the sending unit opening.

Now go to the link and look at the column that says "TANK DEPTH"....... Purchase the one that matches the measurement of your "Tank Depth.

When the sender shows up......You will find it is 1in shorter than your measurement.....
 
Availble in the following tank depths:

9" tank depth - Moeller part # moe-035761-10
11" tank depth - Moeller part # moe-035762-10
13" tank depth - Moeller part # moe-035764-10
15" tank depth - Moeller part # moe-035765-10
18-1/2" tank depth - Moeller part # moe-035767-10
Sender length is 1" shorter than tank depth.

Thanks Warthog
 
Back
Top