Garmin 942xs to Raymarine smartpilot X10

[99Parker2520]

I have a Garmin 942xs MFD that I want to hook up to my Raymarine Smartpilot X10 Autopilot. What do I need for a cord to have the two communicate? I had it hooked up to an older Garmin 2206 prior to the new unit. I believe it may be 0183 to nmea 2000 but not sure?

 

[warthog5]

If the Raymarine needs 0183 input the new MFD will not do that. Or you may be able to do it with the small wires on the Power cable?




Your gonna need this. https://www.thegpsstore.com/Actisense-N ... P3595.aspx

 

[99Parker2520]

Here are both units. I am not sure I need the actisense adapter I may be able to use seatalk or like mentioned above the wire from the power cord but want to be sure so I dont damage something. I also posted on THT and will update here if I figure this one out with some help.

 

[warthog5]

Your gonna have to open the wiring part of each of those pieces manual....side by side to see if it can be done.