ryanc2
Well-known member
Turn to port is very stiff (prop torque?) but turn back over to starboard is almost a grinding/popping/clicking sound/feeling that is most pronounced when trimmed all in. As I trim out, it loosens up and goes away with the stock black Yamaha prop. However, yesterday I tried 2 4 blades (Solas and rev 4 17s) and it occurs almost to trimming out to 5 bars on the tach. Any ideas? Going to check steering fluid next.
Boat is a 2009 2300 DVCC with an F250 in the second highest mount position.
Boat is a 2009 2300 DVCC with an F250 in the second highest mount position.