DaleH
FOUNDER of Classic Parker Forum
FYI, here's the test results from the April/May 2007 edition of Machinist's Workshop. They did a test of penetrating oils where they measured the force (with a torque wrench) required to loosen rusty test devices. The lower the number of pounds the better.
Penetrating oil ... - ... Average load
None ................ 516 pounds
WD-40 .............. 238 pounds
PB Blaster ......... 214 pounds
Liquid Wrench ... 127 pounds
Kano Kroil ........ 106 pounds
50:50 ATF-Acetone ... 53 pounds , now THAT is a DIY mix that any of us should be able to make !
Penetrating oil ... - ... Average load
None ................ 516 pounds
WD-40 .............. 238 pounds
PB Blaster ......... 214 pounds
Liquid Wrench ... 127 pounds
Kano Kroil ........ 106 pounds
50:50 ATF-Acetone ... 53 pounds , now THAT is a DIY mix that any of us should be able to make !