Hello all.... First time Parker owner here, fourth boat. I recently purchased a used 23 DVCC. The previous owner had a kicker motor installed and the bracket was not originally molded to accept a kicker. The kicker was installed using a stainless bracket. I removed the mounting plate and discovered a fair amount of corrosion but nothing too serious. I have scraped away the crude and now have bare metal. I'm guessing it's aluminum and that's why I got some corrosion due to dissimilar metals being in contact with one another. Does anyone know what I should repaint the repaired area with? I will be leaving the stainless bracket underneath as it has a stainless arm that goes back to the transom to support where the kicker motor mount was located. I will use nylon washers to separate the bottom plate and the transom and then reinstall bolts to cover the holes. Any help, thoughts, comments are much appreciated.