Recent content by dkerner

I put those on my 1800 last year. Look good and work well. Really heavy duty.

I saw a photo here of an 1800 or 1801 leanpost that was added on top of the factory seat/livewell. I have been searching and searching. I'd like to add one to my 1999 1800. I need a photo to show fabricator. Can anyone help me out? Thank you.

I appreciate all the help and knowledge here! I am adding hydraulic steering to my 99 1800 and due to the increased wheel height due to hydraulic helm I need a low dish wheel. I can find 15.5"( what I have and too big) and 11" (too small). I have searched the internet for days and called...

Thank you again

Did the 1800 have a pvc chase like the 21 shown albeit perhaps on the starboard side of stringer?

Thank you very much for all the help. Appreciate all your time spent posting this information!!!!

Thank you. I actually have that file. I'm actually looking for hull layout/stringer location and location of wire and rigging chases from center console to port and starboard transom boxes.

Contacted Parker and they said their information has been corrupted and it's no longer available. Anyone here have that information? Need to know wiring and control rigging location and how its constructed. Thank you. Dave

I'm in Houston, Tx. Fish Galveston Bay. I have a 99 Johnson 115 currently. It runs good and is light at 325 lbs. Boat gets on plane well with 15" x 15 pitch stainless 3 blade prop. Takes 4500 rpm to maintain 25 - 27 mph. WOT at 5500 rpm and 30 - 33 mph depending on conditions. Would like...

Was going to repower my 99 1800 eith an Evinrude Etec but that is not going to happen now. Considering a Susuki 140 now due to its the lightest in its class. Anyone have one on there 180? How does it perform? Any information on this outboard would be appreciated.

I have a 99 1800 and have a 62" riptide Fortrex and it works fine. Believe from 2000 on however the freeboard increase by 1 1/2" to 2". Still think it will work unless your in really rough water.

I have a 1999 1800 that I need to mix up some gel coat for a few repairs. I have white gel coat and I wanted some ideas of what colors you mix to achieve the cream color. I have yellow oxide, brown and black colorant. I plan on starting with the brown but any suggestions would be appreciated...

I have a 99 1800. It has a 60 gallon tank. Round access plate between console and helm seat can be opened and there should be a sticker on tank.

Looking for a pair of low bow rails to replace the 1 piece high rail. Not sure if 1801 rails will work. If anyone knows your help would be appreciated. I have emailed Parker on several occasions and have received no response. Thanks. Dave

Typo. 1801