Recent content by pfeifferj1

Hey Fireman... I keep my Parker in the same marina that the guy that bought your Parker is in. We are friends. I can tell you that Cabin Fever is not getting slip fever. He is out on the water all the time and fishing hard. We had a little home marina fishing torney last weekend and your...

From all of us who may have been or will be in trouble sometime in the future -A BIG THANK YOU! Your are what boaters are ment to be. True Seamanship. Thanks

Where are you located and how much do you want for it

Here's a thougth from someone who has no idea how to advise you!! Before I went about cutting, prying or pulling anything I think I would replace every hose and connector on the tank, replace the gasket on the sender unit and see if it still leaks. If it doesn't you have solved the problem and...

Good to see your post. I have a 1991 25' and have twin 225 Yamahas. I blew a head last year and was looking at a repower with the newer 4 stroke Yamahas but ran into the same problem with the 26" center. I thought about having my local machine shop mod the bracket. It looked like I would...

IMHO: you buy a new car run it 250K buy fuel from everwhere never add anything??? Key is to by Clean, Fresh fuel and use the boat

Just a quick heads up. Make sure the bracket is wide enough to handle the new 4 stroke motors. I ran into that on my Parker 25. It was 1" to narrow. Good Luck

If you haven't sold it yet I sure like to have it. Wonder what the cost would be to ship it to Virginia Drop me a PM at [email protected]

Thanks for the come back. I will file this info in my fix it folder. Thanks again Han

Please let the rest of us know what you find out. I have a 1991 and someday will have to deal with the same issue. Thanks in advance.

Brent Make it easy. Get a standard spindle, Don't spend a fortune as you are only going to use it to get the Heavy Ox off. Might consider even renting one. get the cheapest buffing pads you can buy; and go for it. I have tried $35 pads and $7 pads and it makes no differance. If you have a...

Get an angle grinder with 3000 to 4500 RPM. Use 3M Restorer for Heavy Ox. Put it on a then buff it off right away. I know this sounds aggresive but if you do 2 to 3 sqft at a shot and keep the grinder moving you will be impressed with the rusults. After I do that I use a normal wax...

You have a bad ground!

Pfeifferj1 Han No Name 1990r 2520 MV Twin Yamaha 0X 66 225

I run a mod Vee and fish the Bay and the Ocean. I've been in 4 to 6 foot seas and if you operate it correctly, Not to fast and trim right you have no problem. It will be a bit harder ride than some because of the cabin placement further forward. I do a bit of drift fishing and I'll tell you...