Classic Parker Boat Forum

Help Support Classic Parker Boat Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
L

Latest activity Postings About

    • L
      You could always go crazy and build a doghouse like I did. Not for everyone but man it keeps me dry and warm!!
    • L
      Longislandfish replied to the thread 18 SE vs 1801 cc.
      Liner hull are inferior in every way, repairs are harder and space is reduced. Any top boat manufacturer who makes a well build hull...
    • L
      Longislandfish reacted to Efx's post in the thread 18 SE vs 1801 cc with Like Like.
      I was on some new Parker’s at the west palm beach boat show. They have changed. From my first impression and a detailed walk through...
    • L
      Longislandfish reacted to Efx's post in the thread Fuel Tank Failure in Parker Boats with Like Like.
      Here’s my take. A 20 year old Parker with a foamed in tank that is or has been kept in the water will need a new tank from corrosion. On...
    • L
      Longislandfish replied to the thread 18 CC or 18 SE ?.
      Classics never die. My next boat is a potter sc20 that will be rebuilt from the stringers up. Nothing like classic hulls
    • L
      Longislandfish reacted to offduty5's post in the thread 18 CC or 18 SE ? with Like Like.
      Every time the new line comes out from Parker and I see the posts, I always say it. It is not a true Parker. They should rename the...
    • L
      Longislandfish replied to the thread 18 CC or 18 SE ?.
      Same deadrise, slightly wider and longer running length but negligible. My immediate thoughts are, no difference in running performance...
    • L
      Longislandfish replied to the thread Jackplate on a 1801?.
      You are right, but what I was referring to was if you have maxed your height on your bracket out, played with props and were curious to...
    • L
      Longislandfish reacted to warthog5's post in the thread Jackplate on a 1801? with Like Like.
      Don't know where you got that number? 1in of pitch is usually a "Standard" of 200RPM in figuring. I have seen 150 to 200 RPM in...
    • L
      Longislandfish replied to the thread 18 CC or 18 SE ?.
      If you look closely the cap is all one piece. Look at the stern boxes and deck, it’s a 1 px mold and they save money and mass produce...
    • L
      Longislandfish reacted to Efx's post in the thread 18 CC or 18 SE ? with Like Like.
      Looks like some type of partial liner?. I see it only in the front. Looks really odd, with bumps and seam laps?. I’m sensing bayliner.
    • L
      Longislandfish replied to the thread 18 CC or 18 SE ?.
      Exactly, also they aren’t as well built. They just drop a liner down into the hull and the boat is completed. A 3 pc hull is a hull deck...
    • L
      Longislandfish reacted to CobbFisherman's post in the thread 18 CC or 18 SE ? with Like Like.
      What's the downside of a 2 piece hull with a liner? Is it less rigid than a traditional wood stringers with wood floor build? Looks...
    • L
      Longislandfish replied to the thread Jackplate on a 1801?.
      It sounds like what I predicted with the engine height of these hulls. I had a hunch awhile back and raised my engine up to max height...
    • L
      Longislandfish reacted to CobbFisherman's post in the thread Jackplate on a 1801? with Like Like.
      I installed a 4'' setback manual jack plate. I raised the engine so that the cavitation plate is 2'' above the bottom of the hull, when...
  • Loading…
  • Loading…
Back
Top