Puck-n-Fish

My thoughts exactly! I'm not comfortable WOT unless it's perfectly flat.

All one has to do is look at the spec's on the Factory site. Suzuki fills the nitch that Yamaha leaves behind with a DF-140 at a...

I have the Fly-By-Wire. Mine was slightly over that $ but well worth it. :love: 40MPH on the button @ 6100 with the stock Aluminum 3X14X21.

Clean and simple!

Hey Dale, I just wanted to take this opportunity to thank you for starting. and growing ClassicParker. This site is a world of...

I'm guessing you haven't read any of my write ups on this subject ?

Although I only have an 1800, my neighborhood gas station has a slight slope where you pull up next to the pump. If I pulled in with the...

Looks like they did a nice job! 👍 You can see the heat marks from where the baffles were welded from the inside.

Yes, the new tank will be 3/16" with baffles, I am also having the pickup and sending unit moved toward the front so I can get rid of...

Exactly! That crack would be what you would expect from the constant flexing of the aluminum panels. It starts from the inside where...

No, it’s not 30 lbs tho, I’d estimate 120-130lbs. But it’s build like a brick shut house. thank you brother. You never know what to expect.

Did you get an actual weight on it by chance?

I had to wait but I went with white(DF140BG). The one good thing about waiting was when I ordered in Sept of 2021, the dealer wasn't...

Search "decals" on this site... or, Cecil Marine or Great Lakes Skipper. I got mine from Cecil.

Mine was a V-4 and the carbs came off as a pair I believe.