2530 Parker Window Replacement help

[Costamesaspearo]

Hey guys,

I’m redoing the cabin hull liner in my 2530 and can not figure out how to remove the inside window trim. Trying to have the fabric nice and neat behind the window trim. Any input would be great, thanks!!

 

[Brent]

Year? Wynne or DSG windows? For the first, the frame is 2 parts - outer and inner. Are windows leaking? M2cw If no, then I would touch them and avoid pulling and tebedding.. Pics would help a lot. Use Tapatalk app on phone.

B2

 

[99Parker2520]

Remove all of ther screws on the window trim and try to work it by hand. If its stuck try sliding a putty knife behind it but you probably wont need to do that

 

[Costamesaspearo]

It’s 1995 but I can’t seem to find any screws on the side trim?

 

[Brent]

Any pics?

B2

 

[Brent]

Check http://www.wynneinc.com

B2

 

[Brent]

If Wynne windows, the inside frame has screws around the frame looking straight at it. Look at locks and the outer window side of frame

 

[Costamesaspearo]

Thanks Brett, sorry heading down get some pictures and check for screws.

 

[mheltunen]

On my 1994 the screws come from the outside and go thru the wall into (and locking in) the inside trim. They are hidden under a 3/8” gasket.


Sent from my iPhone using Tapatalk

 

[Costamesaspearo]

Ok that makes more sense! I looked everywhere and couldn’t find the screws. Thanks

 

[mheltunen]

No problem and good luck


Sent from my iPhone using Tapatalk

 

[Brent]

On our 94 2320 EC, the exterior windows frames are smooth with no visible bolts seen from the outside, the inner frame has screws to make a clamp

B2

 

[mheltunen]

My front windows are the same as Brent’s pictures but the side windows are screwed from the outside.


Sent from my iPhone using Tapatalk

 

[Brent]

Maybe I goofed. Are we talking about front or side windows?

B2

 

[Brent]

I looked at my side windows and didn’t see any screws or bolts on the exterior window sides.