Legnth of parker 2520SL ?

[Themis]

Can anyone tell me the legnth of a Parker 2520SL (no bracket) from the bow pulipit to the back of the engine, tilted up? I suspect between 28 and 29 feet, but I was wondering if anyone had an exact number.

 

[Outta Here]

I'll bet slightly over 30'. Trying to figure shipping $'s?

 

[Themis]

For two reasons FF: shipping and more importantly, he has a slip currently that holds a 28'6" boat, and there is a waiting list for slips 30 feet and over.

 

[DaleH]

You're at 30'+ with a pulpit and OB on a bracket.

FWIW my '92 (bracket hull) is 32'+ and gets billed for > 30' slips anytime I dock at a transient slip. Here's how I break it down:

25' hull
2' pulpit projection (copied from OEM)
2' OB bracket (29" setback)
3' OB projection when trimmed full up

 

[Outta Here]

Looks like it's time for bow pulpit extraction..SazAll (I reccomend the 12" bi-metal blades, switch saw to "orbit").

 

[Aquinnah]

The picture of your boat in your signature is very clear so I just took out my ruler and measured. It came out to 7 1/2" :lol:
My 2520 XL is 32 feet with motor down, slightly larger motor up. Unfortunately it looks like waiting list time. Hope that doesn't mess up a sale for you.

 

[Capt. Ronnie]

My 2320 w/bracket is 31 ft from end of pulpit to the prop w/ engine tilted up
according to my marina !
I've measured it myself and came up with the same.
though I would rather pay for 23ft like it says on the boat!

 

[Themis]

Thanks guys. I sure hope this sells.

 

[Themis]

Well.... buyer went with a 26' Raden.....