Capt. Ronnie
Well-known member
Just like with my Parker, I took the skill saw and sawzall to the new downeast yesterday.
He are a few pics of the before, I waiting for the after pics to be emailed to me (they were taken on my buddies camera)
Cut the stb side open 6ft w X 44 in high, the door will hinge in and up against the roof.
We cut it out yesterday.
After the cut was done, cleaned up with a grinder then sanded with an da sander, took the router with a rabbiting bit, cleared out the balsa core material about an inch , then filled the void with hull & deck putty.
Going down today to do some more prep work to gel coat the edge.
Gonna trim out both the edge of the house and the door with stainless angle, that will both dress it up and stiffen/ reinforce it.
He are a few pics of the before, I waiting for the after pics to be emailed to me (they were taken on my buddies camera)
Cut the stb side open 6ft w X 44 in high, the door will hinge in and up against the roof.
We cut it out yesterday.
After the cut was done, cleaned up with a grinder then sanded with an da sander, took the router with a rabbiting bit, cleared out the balsa core material about an inch , then filled the void with hull & deck putty.
Going down today to do some more prep work to gel coat the edge.
Gonna trim out both the edge of the house and the door with stainless angle, that will both dress it up and stiffen/ reinforce it.