Recent content by snowdevil

.................. SOLD .................

The boat is located in Warwick Rhode Island. In a slip ready for a seatrial..

anyone in the market for a nice clean 2520xl ? make an offer...

2002 Parker 2520xl 225f yamaha 4 stroke w/525hrs excellent condition inside and out. Stored indoors for winters. 2009 tandem axle trailer w/surge brakes and fresh water wash down Boat includes: full electronics ~ simrad chart plotter, furno radar, raymarine ff, jenson stereo with all weather...

I used led strip lights from extremeled .com he is a member on tht. They look alot better in person the camera is not very good.

Yes the boat has been great and has served us well. We are not getting out just looking at moving up, We wanted to get her sold this fall so we can start looking for something at one of the up coming boat show this fall. Anyone with interest give me a call and lets talk...

2002 Parker 2520xl 225f yamaha 4 stroke w/525hrs excellent condition inside and out. Stored indoors for winters. 2009 tandem axle trailer w/surge brakes and fresh water wash down Boat includes: full electronics ~ simrad chart plotter, furno radar, raymarine ff, jenson stereo with all weather...

Thanks for the reply. I will let you know what the final verdict is later this week. He is calling the insurance company to see what they can do for him as well. I didn't think they covered engine failure but we will see what happens. Corrosion was not an issue as the tech has it all torn down.

dale could you elaborate on the lugging of the engine , rpm. I think you may be on to something. My friend has only owned the boat for a couple of years and it never seemed to go like it should . It would never reach more than 4800 to 5000 rpm on a good day and wouldn't go more than 28 mph...

my friend has a 2002 f225 with 300 hours on it and the oil pump failed and seized the crank shaft solid. All maintenance has been done yearly and showed no sign of anything wrong. Lost rpm at first then stopped and never started again. Waiting on a price for a short block and labor. To bad...

we stay aboard our 2520 every weekend as well. Last year I rigged up a portable ac unit from home depot and it keeps the cabin in the low 70,s @ night. I ran the vent out the port side to the cockpit along with a dryer vent and the unit fit right under the port seat with no interference to the...

I changed from the stock 15x17 to a mirage 15.75 x 15 I also have seen a great improvement in every aspect , along with a gain of 6mph on the top end as well..

I had to replace my seals on the starboard side lift piston as well they where leaking . I didn't have a spanner wrench but there is enough room to get a big set of channel lock pliers on the edge of the cap and some real good pressure . It came right off with a good pull or two and nothing...

Finally got the boat in the water this weekend and was able to see how the prop performed. Everything seems to be for the better from the use I got this weekend. She plaines right out @ about 4200 / 4300 rpm and gets up to speed real quick, I have seen a 6 to 7 mph gain on the top end. top...

Thanks.. The camera doesn't do the lights justice ,especially the red. they look alot better in person.