Search results

So I'm not sure why I titled this thread "New Project...". Maybe it's just force of habit since the last two boats I bought were a '76 Forumla 233 and an '86 Grady 227, both with their share of "issues". Anyway, I went a different route this time and bought something that works. Introducing...

Brand new 30" Armstrong non-platform flotation bracket. Includes Armstrong deck plate, 1/4" aluminum mounting washers and touch up point. 12 degree transom angle (I am 99% sure of that). Good for up to a 250 hp engine. Never been mounted. Originally bought for my old Formula 233 project...

A buddy and I were discussing the boat shown below (supposedly an early to mid-80s 21 Parker) and trying to figure out what is going on in some of the pics. We aren't sure if some of the things shown are how it was set up from the factory or if someone has taken a saw to it and created their...

1987 Load Rite galvanized trailer. Good condition. 16 rollers. All lights work. Working Powerwinch model 315. Descent tires. 2,700 lb. GVWR. Clear title. I had this trailer under my 17' Mako. Sold the boat and the new owner did not want the trailer. $650/obo. Located in...

2000 Nissan NS90A outboard. Hours unknown and not in the best shape cosmetically, but the compression is excellent (145 - 147 on all 3 cylinders) and it does run. It started up for a second or two when I was checking compresssion with a remote starter switch, but I don't have the rigging to...

1995 Mercury 225 EFI outboard. Runs good, good compression but hours are unknown (Mercury Marine replacement powerhead). New lower unit approximately 3 years ago. Upper and lower cowlings could use paint and I started peeling the decals to do so. I bought it 2 years ago for a 22' Grady...

Pair of Todd Freeport Helm Seats. Includes old height adjustable pedestals, manufacturer unknown. Seats are in very good condition, pedestals need some work, but could be made nice. Seat description and measurements can be found here: http://www.toddusa.com/productdetails.aspx?id=20&f=13...

18,000 lb. (if I remember correctly) winch post. Fits 3" wide trailer tongue. 41.5" tall, base is 31" in length. Removed from a triple axle Loadmaster aluminum trailer and stored for approximately 8 years. New condition. This is just the winch post. Trailer, winch, winch mount and u-bolts...

14 lb. Delta Fast Set anchor in like new condition (it may actually be new, I can't remember). I purchased it from someone online 2 years ago for my Grady and never put it on the boat. Boat has since been sold so I have no more use for it. Has been sitting in the basement since then. No...

Cleaned up my basement the other day and ran across a bunch of things I won't be needing any more. Prices listed are flexible.... 10' section of 1-1/2" fuel fill hose New a few years ago, never had any fuel through it. Previous owner purchased it for my 17, but never installed it. Been...

Have a pair of '89 Yamaha WR500F Waverunners I am looking to unload. I have too many other toys and projects around the house to attend to, so these need to go. The first (the covered one in the pics) was purchased from a coworker about 2 years ago and I immediately cleaned out the tank, put...

1981 Mako 17 Standard PROJECT Center Line Length: 17'0" Beam Amidships: 7'2" Hull Draft: 7" Deadrise at transom: 12 degrees Weight: 1400 lbs. Fuel Capacity: 24 gallons Max HP: 135 Boat needs the transom and gas tank recored, but is in otherwise excellent shape. The transom (outer skin and...

Thanks for the heads up. I just subscribed!!! :)

I'm looking for a 13-3/4 x 19 right hand Yamaha SS 3-blade prop like the ones pictured below. If anyone has one they would be willing to part with, please let me know. I have a 13-3/4 x 17 right hand Yamaha SS (black painted) 3-blade that I could trade for the 19 if someone needed a bit less...

This is my brother's trailer, so if there are any questions not answered in this description, you'll need to call him at the number below. All I know is that it's a Shoreline tandem axle galvanized roller trailer. It was being used as a storage trailer for an '89 Grady 23' Gulfstream. Has new...

Have a single Yamaha ignition switch and an approx. 20' 10-pin main harness. I'm not sure what the part nos. are, but all were new in '00 with a 200 OX66 (SX200TXRY). The switch is in good shape (just the edges of the plastic covering are peeling up a bit), include two keys and has the kill...

Have a multifunction tach, 8' power/gauge harness and an approx. 23' trim/oil harness. I'm not sure what the part nos. are, but all were new in '00 with a 200 OX66 (SX200TXRY). The tach has indicators for trim, temp and oil and the hourmeter on the tach reads 65 (if memory serves). There are...

Have a used pair of 16' Yamaha throttle/shift cables that I'm not going to need. They were installed new in '04 I believe and are in excellent shape. Looking for $50/obo + shipping for both.

These 26' tach harnesses came with the multifunction tach kits I just bought. I needed the 31' harnesses so I bought those separately instead of getting the 6' extensions (one less connection point to worry about). Part. no 68F-82553-80. Both are still in the original packaging (one was...

I've got two stainless steel 3-blade Yamaha props I won't be needing, so I'm putting them up for sale to get them out of the garage... The first is a Yamaha "Performance Series" wheel. Part no. MAR-GYT3B-V6-18. Dimensions are 14-1/4 x 18. The finish on it is pretty good. Has some scratches...