Search results

I bought a nice crab pot hoist from Discovery Bay Marine Gear. It is not for my 1801, but is for my house. 3 stories and a hip replacement. With a large muck bucket and a piece of line, it hauls all my groceries up three stories. looks good too>

I have a 2001, 1801 with the flip back seat/livewell combo. I have replaced my thruhulls with gemlux stainless(I have two for bilge pumps), but the live well thru hulls on the transom look different from a regular one. Any ideas or suggestions on replacing them?

Try this one. It is a project that I have been meaning to do on my 1801, but have not yet. http://www.gemlux.com/catalog2010/plumb ... s-90degree

Keauhou, I taped and sealed my rub rail and inside deck -hull seam with silicone and it did not affect it at all. If the rub rail leaks aft of the anchor locker bulkhead, it would run down the deck and out the scuppers. The search continues.

Thanks Fishfactory. I think what I am going to do is wait a couple of weeks until I launch it for the season in a nearby lake. Then I can rule out the pump being cracked, and can watch it at speed. If That does not work, I will take it apart, inspect, and reinstall so it wont leak. At least...

First of all, thank you all for replying. I was beginning to think no one was, but knew Classic Parker is better than that. My thru hull has a ball valve made into the casting. It has a flange with three empty bolt holes inside the bilge. The pump mounts on the top of the thru hull. Outside...

It is the bronze llve well pickup. I have water in the bilge every time I use the boat,and i have ruled out all other posibilities. The thru hull has a ball valve made into it, and I keep it closed all the time as I dont use the live well. It looks like it will be a two person job to get the...

My 2000, 1801 is leaking around the live well thru hull. I need to take it out, inspect, and re-install it. Has anybody had one out, and how did you do it. Thanks for any help.

Tie down is a brand of brakes. They did not stand up to salt water, even with constant rinsing and attention. The kodiak discs are the cad coated with stainless pistons, and have been great so far.(two years) The weight of my boat suprised me too. When I replace this trailer it will be...

fog I have a 2001, 1801, Yamaha 115 two stroke on a loadrite trailer(single axle). With 40 gallons of gas, dual batteries, and coast guard gear it weighs 3640 pounds at a certified scales. I like my loadrite trailer except it came without brakes. I added tie down brakes,and that was a horror...

Thanks for the advice. I will try running the bearings one notch looser than I usually do. I am also getting a IR thermometer.

After reading Jeffnick's list on hub temps. I have a question. I understand that disc brakes run hotter than drum. What would be a good temp scale for towing with disc brakes. I have Kodiaks on my trailer and sometimes they feel too warm.

I checked on the parts last week for my 1801. The box, windshield,and grab rail is 788.58. Too much $$$$$ for me.

Board name- oldnavyjim Real name- Jim Holmes Boat name-Sarana Hull year- 2000 Model- 1801 Engine- Yamaha H.P.- 115 two stroke Engine year- 2000 Home port- Ruffin/ Emerald Isle, nc

I have a 2001 1801 and enjoy hearing from other owners about thier boats. good idea.

thanks dale. Now i know why my 1801 will not take fuel when on the trailer after a week on running. In the water, with some movement ,it ts fine. jim

Atlantic boats were made in Kinston,nc. i think they went out of business around 2000. I tried to buy an 18 footer with a well and they could not get any more. I stopped by the shop in kinston and the molds were outside in the weather and they looked closed down. I have heard since that...