2300 bunk setup ?

[dsearles]

Does anyone know what is the best bunk spacing for a 2013 2300 DV?

And does anyone know the bow eye to transom length of a 2300 (I am trying to avoid driving all the way to the marina to measure it and its not in the spec on the Parker site that I can find)

This would only be used for storage and to put boat in/out once a year

The trailer would probably be a Venture VATB-5925 spec as follows
wheels capacity Max boat length
ST205/75D 14 LRC 5H 5925 23'-24'* with single axle brakes

thanks David

 

[warthog5]

It's always been my contention that trailers are like anchors....You need the next size up to fit correctly.

I could write a book on trailers......

When I spec a trailer to be built......Not off the shelf....I look to Hi-Tech Marine out of Panama City,Fl.

I start with a tongue length that is 18in longer than stock. This helps keep the tow vehicle out of the water on the ramp. It also makes the trailer tow and maneuver easier.

A Full frame trailer! No bunks that are cantilevered past the rear crossmember by any more than 6in.

Like this:

Here is a trailer for a 23ft boat......See how crappy it fits ?

Here you can see how much better a 23ft boat fits on a 26 - 27ft trailer.

Forward Keel Bunks.

Like This:

Not This!

Note how well this skins up your Keel

This is just a few things that stand out at the start.