2520 questions

[GrouperPirate]

Hello all! Question about the mounting brackets on the 2520, if you purchase a boat with a single outboard, can up or is it possible to mount an additional outboard motor? Having trouble finding a boat with twins on it. Any help will be great! Thanks

 

[Brent]

I would check with Armstrong and Stainless Marine who made the brackets.

It deoends on the marker.

Parker Corporate should be asked , too. When you find a boat

Sent from my SM-G930V using Tapatalk

 

[warthog5]

On a Lot of boats they have a Bracket tub that is only 18in wide for a single.....These Parkers can get away with it due to the 9 1/2ft beam and wider transom....Wider transom equals more flotation.

Now think about adding another 600lbs [round figure] You will need a larger tub to help support the weight of the engine that is cantilevered back there. It's going to need at least a 30in wide tub.....and maybe even larger?

The wider you get.....Then you run into interference with proper size trim tabs. 24 X 9's is what you want on that hull.