twin motor bracket

[chipperdog]

looking for a twin engine bracket for our 2530 mod v, she has a single bracket now..thanks for replies

 

[BradV]

what are you trying to do?

 

[chipperdog]

Trying to go from a single engine to twin

 

[pfeifferj1]

Just a quick heads up. Make sure the bracket is wide enough to handle the new 4 stroke motors. I ran into that on my Parker 25. It was 1" to narrow. Good Luck

 

[chipperdog]

Thanks for the info as this is a new venture for me..thanks again

 

[DaleH]

looking for a twin engine bracket for our 2530 mod v, she has a single bracket now..thanks for replies

Contact A&J Marine, 305-265-7922, they custom build brackets at a fraction of the cost of Armstrong brackets.

Website = http://www.custommarinewelding.com/products_engine.htm

Take a look here of a hull I helped on using an A&J Marine bracket: viewtopic.php?f=11&t=6972

 

[HVF21221]

Mine was from A&J Marine.
In 2006 the 30x90x17 degrees with ladder mount was $2700.

 

[warthog5]

Of the different manufactures out there, Hemco has the largest tub for max flotation. That is what you want.

Don's are built of fiberglass. http://www.hermco.net/

Bracket Mfg's
http://www.armstrongnautical.com/
http://www.bbracket.com/bracket.htm
http://www.dadmarine.com/index00.htm
http://www.gilmarine.com/products/gbrac ... ckets.html
http://www.hermco.net/
http://www.portaproducts.com/index.html
http://www.seamount-mattson.com/
http://www.stainlessmarine.com/
http://www.custommarinewelding.com/products_engine.htm

 

[chipperdog]

thanks for all the responses.. looks like we are going to keep single bracket..going with the new 300 offshore series yamaha..