1801 Rocker Panel circuit breaker

[reellucky18]

Anyone have a link to the correct size rocker circuit breakers for the 1801? I have a breaker I want to up in size (RAW Water washdown), since the breaker I have installed (7 amp I believe) is to small & will trip after running the pump for 1 min. Max draw on my pump is 20 amps so the breaker is the weakest point.

Any help is appreciated.

 

[warthog5]

I'm guessing your talking about the push to reset Breaker under the rocker switch?

What you haven't figured is wire size. Going from 7amps to 20amps the wire size will need to be replaced. Guessing 10ga without knowing all the facts.

Buy a Breaker here : Push-to-Reset Circuit Breaker

 

[tomc585]

FYI
The OEM breakers on my 2004 were JOEMEX 77 series. The mounting hole is just under 3/8" (25/64"). Whichever brand breaker you purchase the original set nuts and bootie will not fit on the replacement breaker.

 

[reellucky18]

I'm guessing your talking about the push to reset Breaker under the rocker switch?

What you haven't figured is wire size. Going from 7amps to 20amps the wire size will need to be replaced. Guessing 10ga without knowing all the facts.

Buy a Breaker here : Push-to-Reset Circuit Breaker

Correct that is what I am referring to.

I rewired the entire boat over this winter & replaced the existing wire with new 10ga wire.

Thank you for the assistance.

 

[pelagic2530]

I buy mine from the same link that @warthog5 posted. It comes with the new waterproof boot, so no worries there. It’ll fit the panel cutout no problem.

 

[reellucky18]

Thank you all for the input!