Hello, searched with no help. Hope some one has an answer. 1995 2320, need to replace a few switches and circuit breaker in the original dash control panel. Need the numbers, then I can order. Thanks, Randy
Has anyone modified a pulpit to move the anchor back a foot or so to allow a spot light in front of the anchor. I have tried several ways to stop the glare from the rails. I know this would cut a slot for the anchor to stay under the pulpit.
Hello parkers, we make this trip every year to enjoy the Apalachicola Sea Food festival and enter blessing of the fleet at Friday 4:00 pm with a couple other parker boats, first weekend in Nov each year. Rooms fill up fast best place is Bay City. Randy and Debbie
Hello parkers, we make this trip every year to enjoy the Apalachicola Sea Food festival and enter blessing of the fleet at Friday 4:00 pm with a couple other parker boats, first weekend in Nov each year. Rooms fill up fast best place is Bay City. Randy and Debbie
1995 2320 cut transom, thinking about repower, weight is the same for the 250-300 yamaha. Anyone have info for running a 300 on a cut boat? Drove a 2015 2320 with a 300 on a bracket ,very nice 54 mph at full throttle. Randy
I would like to view some more information on this subject. Just broke a crank on my 225 EFI and pondering all ways to get back on the water. New motors are 100 lbs more and we already have wet feet from the scuppers, enjoy reading the comments, I read that the newer 2320 fuel tank is moved fwd...
Replacing the 2000 EFI 225 Merc on the 2320 this year with a new motor. Love the boat but not satisfied with the 22 mph cruise at 1.3 mpg. I know the boat is rated for a 250, would go up with no problem is it worth going to a 300? Merc has the 250 Opti, not interested in a Verado, the new light...
First: I broke the locking latch on the drivers window, any idea where to get a replacement? West Marine has a similar looking plastic latch, not stainless. Second: I am getting water in the boat filter and the engine filter, more when the waves hit the left side of the boat. The vent is the...
Our 2320 has a 2000 225 Merc EFI at best cruise 4200 rpm at 1.67MPG. It likes oil and gas but runs good. Any of you have newer motors with better MPG? Using the boat for 500-600 gallons of gas per year,can I justify $13,000 for a new 4 stroke? If anyone has a 2320 with a 4 stroke, please post...
Best cruise fuel mpg was at 4200rpm, 25.5mph, 14.6gph,1.74mpg. On a jack plate up about 3 inches. The Merc 3 liter 225EFI does like gas and oil. Maybe in a few years move up to a 4 stroke.
I'm in the same situation. Looked into a lot of ways to clean and paint. What I am doing is using a pressure washer to remove all the loose paint, sanding, then repainting with a gallon of black Vivid. This paint is listed as being a hard paint for trailer boats. The gel coat on your boat is...
A Mirage Plus 17P. Said that it was like new. I priced around here with $605 list and a discount to $504. The reserve was $225 and got out bidded the last few minutes, but I'm happy. That was my first E-Bay purchase.
OK Thanks. This is due to an engine swap from the Seacraft. I know most of you have Yamaha's but I didn't know if you use a 1.75 gear ratio like the Merc. I have looked at the prop replies over the past few weeks about the Yamaha props. We are a proud owner getting ready for the gulf fishing, we...
Swapped motors and the 19" Laser II is not enough RPMs 5100 with a load. Anybody running this boat with this motor? Dropping to the 17", would that be just right? Thanks Randy
Sad story fom a guy down the street, he bought a used Donzi last year and registered it in Alabama. Yesterday the ABI came to his house, told him that the boat was stolen and took it to an impound yard. The serial number had been altered and there was another serial number under the console...