Search results

Just sold my 25 Parker looking to downsize, let me know what you got. Thanks Ken

I started ripping out 20 year old cabin carpet today, what a mess. I was hoping I would be able to paint areas that had carpet covering with minimum prep, looks like I was wrong! Has anyone else taken on this project and if so can you share your technique? Thanks, Ken

2000 2520, any know what factory pipe stem diameter is? Mine is 20 years old and need replacement. Probably just wait till I pull the old one out to be for sure but was trying to get ahead of the spring maintenance thanks for your help. Ken

Parker 2520 MV 9 1/2’ Beam Custom Cobia Tower W/Steering & controls 2017 Yamaha F250 w/gauges 300 hrs 2017 Steering piston 2017 bottom soda blast 2017 Batteries 2015 premium cables Windlass,Raw water wash down, cruise 28-30mph, wot 41mph,126 gallon tank, modified V 11” draft. This boat is...

Hello it's been a few years since I've posted. I pulled the trigger this week and replaced my 17 year old ox66 225 with a new 4.2 liter f250. That old motor was very good to me and never left me stranded, original power head and lower unit. But all good things have to end sooner or later. She...

Last season while wiping out my bilge, I realized I have never touched the ball valve that supplies my raw water wash down pump. So with some effort I closed it and reopened it, or so I thought? Since then the presure has dropped to half of what it was. So I have to assume the valve did not open...

Hi and happy holidays to everyone! Over the past week or so I have been having trouble signing on to this site. I get a all white page that says something about (I'm Forbiden to access site). Wonder if anyone else has had this problem. Merry Christmas, Ken

Hi, I need to replace my original shift cables on my 2000 2520 w/notched transome. Can anyone tell me the correct length to order and maybe some ideas on best place to get them? The boat is wrapped up for the season so I can't pull the old ones to measure them, but I would like to get them over...

Hi Everyone, Has anyone fished Cabo? If so, can you recommend any good boats or boats to stay away from? Any info on must see and do stuff also greatly appreciated! Heading down Dec 4th . Thanks, Ken

I found this on Craigs List $100 Brand New! Has anyone installed one of these on a Pilot House model? I have a 2520 w/ a factory Pulpit and would like to install it on top. Tired of running up to bow to push anchor off. Thanks, Ken

I want to replace my fuel vent while I'm replaceing fuel fill and vent lines. Some of the stainless vents I'm looking at say for hulls up to 1/2" thick. I'm thinking my hull is thicker? Thanks, Ken

Hi Guys, 1.Does anyone know what size shaft was used on 2520mv notched transome? 2. Has anyone repowered this hull with a Yam 225 4 stroke and were you Satisfied? My orig 225 OX66 still runs good, but it is 11 seasons old and has around 800 hrs on it. I found a good deal on a 2009 left over...

I just had my best week ever Striper fishing. We landed 28 fish 33"-41"/33lbs. For most of my friends and family that fished with me last week, these were the biggest fish they ever caught. Short days of catching beautiful fish and long evenings filled with laughter and beer. Life is good!

I received my order of filters from Island Ship Yard Marine. I was expecting to see a new vst filter with the extra filter area on the sides, but the one I received is the same as previous. After a 20 minute conversation w/ Andy @ISYM, he found this thought to be new style filter is in fact the...

Launched boat first 3 trips no problem. Last 3 trips vst filter clogged up everytime on the way back in. I ordered all 3 new filters, main raycor (old one only had about 45hrs. on it), filter thats on side of motor in clear bulb and vst filter. Hopefully this will solve my problem, but I'm not...

I had the fly bridge installed last year. This spring I installed the steering, controls, trim/tilt & horn up top. I'm really happy with the way its coming together.

Hey Guy's, my 2520 w/225 0x66 speed is about 23mph @ 3800rpm. How doe's this sound with the troops? Thanks, Ken

I think I found the 2 7/8 bushing on line, but it doesn't mention the taper mine has. My chair is on a 2000 2520. Anyone had to replace theirs? Thanks!

I noticed my fuel Overflow hose in rotted. So I want to change my FILL hose as well. Has anyone done this? If so, what diameter are the lines and what lengths do I need? My boat is in a remote area, so I would like to have everything with me when I get there. Thanks for any help!

My mechanic reccomends the job get done every other season?? I do put a good 100 hrs a season on the motor. The last time the job cost about $350. I am mechanicly inclined and think I could handle this. 1. Has anyone done their own (parts cost)? 2. How hard is it (time)? 3. Any special tools...