Search results

This boat has served me well however I have outgrown it and have found another boat.

What do you guys recommend for an autopilot for a 2100SE with an F150, Hydraulic Steering, etc. (as per my siggy) ? Thanks a million in advance.

I want to thank the others here for posting photos of their stereo installations. I found them to be a tremendous help in selecting which components to use as well as where to locate them on the boat. I went with the Poly Planar MA9060 speakers mounted under the gunwales (Hodges Marine, $146...

I've given up on using my Garmin 498 as a bottom machine and going with the Furuno 585 (kinda like going from a Hyundai to a Mercedes Benz) with the Airmar B164-12. Has anyone ever cut one into the hull ? The ducer is 3 3/4" diameter and looking into the bilge it appears there is a piece...

I'd like to put a new fishfinder either FVC-620 or the 585 and an Arimar B60 thru hull. Should I go with the 12 degree transducer on my boat (2100 SE) ? Seems the 20 degree would be too much angle. or the Airmar B117 which has no angle. Just want to make sure. Does anybody have the same...

I'm thinking about replacing the canvas with a 1/2" sheet of Starboard or Seaboard. Probably just thru bolting it to the tube around the perimeter. A 54" wide sheet will work perfectly. Has anybody ever done this ? Seems like it should work out. Just wondering if there are any downsides.

Getting ready for the upcoming season and one of my projects will be to install rope lighting under the gunwales. I want to run separate circuits to light the cockpit fore and aft of the center console with both red and clear lighting and have all the switches in the t-top. Its a bit tight...

The wind layed down for the day and my wife had to work. So what else was I going to do ? 40" BFT Now if the weather would just get better so I can get back out there......

But I have to say, even though minimum size was 20.5", we had a fabulous season. Absolutely Fabulous. Loads of Quality Fish and loads of fun I think were gonna need a bigger freezer........... Best to all, MWF

Dayum Sharks. Its tough enough trying to ketch a keeper fluke (20.5") now we got sharks right in close in competition. A friend of mine who is a charterboat owner told me he saw a 200lb mako breach. This was typical of my catch yesterday. Got sick of it and went home. And yes, I threw them...

Bow light is not illuminating. Checked the breaker and it wasn't tripped. Next thing I'll check is the bulb. Kinda surprised and disappointed to have a problem already since the boat is only a year old and very very very low hours on the running lights. Probably a dumb question but, how do...

The wait was worth it since this is what caught on the first drift (8.9 lbs).

Thought I would share some photos of last weekends project and hope they may be of help to someone in the future. Mounted the backing plate about 1/8 above bottom and 3.5 inches in from the chine (dry fitted in this photo). Everything along the way was dry fitted first before caulking...

I'd like to install trim tabs on my 21SE before I haul in soon. I did a search on trim tabs on this site and decided the best size is probably 9 x 18's (correct me if I'm wrong) now the choice is between Bennett and Lenco. I'm leaning towards the Lenco's strictly because I like the switch...

Just joined. Look forward to being a part of this kewl site. Tight lines.