Meat Without Feet
Well-known member
- Joined
- May 12, 2008
- Messages
- 51
- Reaction score
- 0
I've given up on using my Garmin 498 as a bottom machine and going with the Furuno 585 (kinda like going from a Hyundai to a Mercedes Benz) with the Airmar B164-12.
Has anyone ever cut one into the hull ? The ducer is 3 3/4" diameter and looking into the bilge it appears there is a piece glassed in on the starboard side of the hull for this purpose. The bilge pump switch is also mounted on this piece .
Before I cut this hole any help or suggestions are appreciated.
Thanks.
Has anyone ever cut one into the hull ? The ducer is 3 3/4" diameter and looking into the bilge it appears there is a piece glassed in on the starboard side of the hull for this purpose. The bilge pump switch is also mounted on this piece .
Before I cut this hole any help or suggestions are appreciated.
Thanks.