Search results

. ...definitely agree. .....Fusion radio line is fantastic.

. . ....you may want to check. ....I have a 1999 2320 notched transom I'm repowering...... rated max HP is only 225 HP for this year. Imagine yours would be same/similar. ......the older models were also not made to hang the weight of these new (large) 4 strokes. May possibly sit your boat...

. . ....I'll take your motor :lol: :lol: . . .....

. .....Mike when I did my unit I bought it right from WEMA because they do 1/2" sizes. . ...I have the 13.5" in my tank (1999 2320 with 150 gallon tank 14.5" deep). ........

. . . ...thanks for the input guys. ....I'm sure the seam (flange) where it is attached is broken . ...especially because that's where all this is leaking from. . ....so it would be pretty safe to say that water is also getting in that way. My lazy azz procrastination got me again this winter...

. . ....tried to get a couple pics the other day ... ...they're not the best but. ...this is what is coming out from under the pulpit. . ....it had just rained pretty heavy so some of it washed away. What is left will have to be scrubbed off and sometimes requires bleach to remove. ..... ...

. .....ok. ..here goes. . . ....last year I started to get a brown "something" leaking out from under my pulpit. .....first time I saw it I thought it was melted chocolate ice cream. ...ha. .no! Whatever it is leaks from the under the caulk .....where the pulpit lays on the bow (deck). ....and...

. .....yup. ..what shawnee83 said! The 15X17 is more than likely what the dealer would put on. . .....that's what came on mine, but . ....I can't get WOT (5500) so I'm going down to a 15x15. Without you knowing where you are in WOT (and a few other things) it's hard to answer . .......but 13 1/2...

. .. ...no pictures of it on the boat, because I went a different route. .......but this is what I was planning on using. ........... ...it was a decent height for me (I'm 5'9") without killing my back. Reason I went a different route . .... wife and guests like to sit on the cooler while...

. . ..the factory splash well is just fiberglass. ...maybe 1/8" thick. I will be fishing tomorrow, so I will try to remember to get a measurement for ya. The splash well will definitely keep all that water off the deck!! My well fills, but deck stays completely dry. .. ...If you don't get...

. . . .for a full transom I like Mike's set up a lot. ....I have the notched transom and this came with the boat. . ...wasn't sure I was going to like it, but it works great.. . ...also plenty big to filet back at the dock too. . . .. . . .sorry about the crappy pic. . ..still refuse to...

. . . .....unfortunately . ....my (home) computer died and I lost EVERYTHING :x BUT. . ......I snagged this from the good ol' internet. This is what the splash board on my boat looks like. ...and like I said....it keeps all the water off the deck. There are scuppers on the transom that remove...

. . ...NICE! My buddy just came back from 9 days down there. . .. .his sister has a place down there and his nephew just got married.. . . ..beautiful place.

. . . ...good to see it was something simple...... I always keep a spare fuel filter on board. I change it every 50 hours, but. . . .sometimes I get similar issues to what you had and it obviously gets changed sooner.

. . . ...If it got beat up at/on the dock I would make sure you didn't bend the prop shaft. .........may be leaking from the seals because of that. . . ... just a thought.

. . .. ..never tried hanging from the ocean like that ;)

. . .....I just performed my once a year cabin refresher with Simple Green. . .. ...I even wet the carpet...spray with Simple Green, and gently scrub.. ..then rinse/blast it with the hose. Bye bye dirt, mold, and odors! The rinse off goes in the bilge and cleans that too! Been doing for years...

. . . ......to get the seals in I borrowed a bearing seating tool from work. I was going to go the PVC route until I remembered we had this.. . ...made it very easy too. So. ...like the tech said. ...a light coat of 90 weight and pressed right in.. ...times two!! . ....the seals and the tool...

. . . .. ..for the bottom seal I flipped it over and very carefully tapped it out. Like TomS said earlir. . ....take your time. You don't want to gouge the side!! This is what I used to tap it out........ . . ........once out you'll want to clean all the crud build up off the inside before...