Search results

Just listed on Boat Trader. https://www.boattrader.com/boat/2008-parker-2520-xl-sport-cabin-7931439/

I have looked through the old posts and I see NAPA 60-012-2 AccuFit has been used as replacements for our windshields. The problem is, NAPA does not carry those designations anymore. Can someone give me a model that is current? That is confirmed for these bayonet arms. I want to order online to...

Does anyone know what length the cables need to be for a 2520xl with bracket from the free standing station back? Have a single F250 and the Morse Twin S controls. There are no numbers anywhere giving me a clue. Thanks in advance! Sent from my SM-G930V using Tapatalk

Hi all, My motor is cutting out at about 4300 rpm. It just shuts off right after losing revs and coughing a bit. It happened once last week, then more frequently this week. Thats when I changed the F shape and VST. I changed the onboard and the "easy" on engine filtrrs 2 weeks ago. Now I've...

This goes out to the guys on the upper East Coast. If you haven't heard about the current Striped Bass stock assessment, it's not good. Without going into too many details (I'll let you do your own due diligence), our beloved bass are in trouble, again. I guess I'm asking you all to take a look...

Selling a prop from my Mako. Used one season. Mint condition. 15.5 x 17, 3 blade, rh. Comes with TBX hub for Etec motor. Asking $325, you pay shipping or pick up local. Over $550 new. Sent from my SM-G930V using Tapatalk

I posted this on NJAngler's post about his 2110 redo, sorry NJAngler! This belongs here. Some of you have made mods to get your hull to plane at lower speeds. I would love to get my boat to hold plane at 3400. Sea conditions in my area (RI Sound, BI Sound) are typically 2-4 foot, SW winds...

Not a trophy, but while searching for squid, found this little guy with a white jig/curlytail. Sent from my SM-G930V using Tapatalk

I installed the MOB fob in my dash over the winter and now my F250 won't start. Kicker started right up. I have a feeling that fob is the culprit. More specifically, the way I wired it. I have a second station and both the inside helm and outside helm have the old lanyard cut-off switches with...

Hi all, After trying to pull any wire from the transom of my 2008 2520XL to splice a new actuator in, I realize that I can't even get a millimeter out. There is some sealant in there but it seems there is no slack behind there to get enough. Has anyone run into this problem? I can't get in to...

50 degrees and sunny on Monday, finally! Got the cover off the boat. Yay Sent from my SM-G930V using Tapatalk

Hi all, Was wondering, for those that use them, if you run wire in them or braid? I have wire and hate it. I have lost weights due to weak spots. Would love to use braid...

Hi all, Drove out to Provincetown, MA yesterday to pick up an Electradyne hauler and davit. Met a nice guy living and shellfishing out there, he had some great stories. Anyway, looking to install this davit about 2 feet behind the freestanding station on the starboard side, leaving me enough...

Thought I would share what I found on my boat today with you all. While in the rear bilge trying to make sense of all the battery wiring, I noticed a negative buss bar tucked way up in the starboard rear corner wall of the bilge. I had to stick my head way in and up to see it. You can see where...

Hi all, In my quest to be as anal as possible, I have been thinking about the current battery setup in the 2520 XL I just bought. Boat has a Yamaha F250 with a 9.9 kicker, it looks like both are charging the batteries, but I'm not sure. Currently, it is setup with 2 Group 29 Deep Cycle batteries...

Hi all, The 2520 I just purchased has this stand alone unit with gps, radar, and bottom machine. Playing around in my driveway I realized there was no cartography chip in it. The preloaded map kinda sucks. I'm confused as to how to remedy this. Garmins website is confusing at best for the older...

Hi all, Just closed the deal on new to me 2008 2520 XL. Real excited to get her in the water and start fishing. Got a 250 Yammy with a 9.9 kicker, and a free standing second station. Galley unit too. Plan on putting a davit and hauler in. Any photos of current installations would be great to...