Search results

I have a 2003 F225 with over 1100 hours and it has never been flushed. It is however serviced on a regular schedule. I have no problems, engine operates fine.

Bryce The MOJO's are tandem rigs. 24oz and 3oz Both with 9" shads and trailer hooks Good luck Dennis

We also fished Saturday around #9 in the Potomac. Also caught small fish from 27" to 36" Fished the same area on Friday and caught one 42" All fish caught down deep on MOJO's in approx 45ft of water.

I had the same problem with my F225. Changed the T-stats and everything is OK

My 2520 will squeak sometimes when I am trolling. I found it to be the latch that holds the door open. I just stick something in the hole and then put the latch in it and the noise is gone.

My son and I fished the Potomac between buoy 7 and 9. We caught a 35" and a 38". Great day, we were finished by 10:00AM Good luck on your trip.

I have tried both rollers and bunks. My vote goes for the bunks.

This is what I did to my 2520 Mounted with 1/4 inch bolts and 1/4 X 2 inch back plats

I wear Muck fishing shoes they also make a fishing boot. They are non marring and they are warm. Also a little on the pricey side. http://www.muckbootsandshoes.com/fishin ... 4Aod3x53Gw

I had the same problem with my engine. My mechanic installed a vapor recovery kit part# 90891-40430-00 and everything is fine. Do a search for vapor lock and/or engine stalls. You will see my post. Good luck Dennis

I had the same problem back in 2008. My local dealer installed a vapor recovery kit part# 90891-40430-00 everything has been fine since the installation. You can search under Engine Stalls to find my post. Good luck

I agree with the Animated Knot Page. It's great. http://www.animatedknots.com/index.php? ... dknots.com Good luck

I also have a 22lb Delta with 40ft of chain. Works great.

This is the local tackle shop that I use in Virginia. They are great. http://www.rwsports.net/about.php Good Luck

You can also try Garrett's Marina on the Rappahannock. They started selling Parker after Mid Atlantic closed. http://www.garrettsmarina.com/

I had a problem with my engine stalling when it was hot and then would not start. Found out it was a vapor lock problem. Had to install a vapor recovery kit. Check out this site for more info. http://classicparker.com/phpBB2/viewtop ... highlight=

I just buy 15" replacement blade from NAPA and cut to length with a dremel tool. Approx $7.00 for two.

Good News! Garrett's Marina is now a Parker dealer for the Northern Neck and Middle Peninsula area of Virginia. http://www.garrettsmarina.com/index.htm

Sommertime, I sent you a PM

What parts are you looking for?