Search results

I trailered my boat to Islamorada for the winter and need fishing and diving partners. If you're here already or coming for vacation feel free to contact me to get in some diving or fishing. Capt Brian 732-245-3816

I currently have my 1999 2520 w/ 250 yamaha 4 stroke on it on a Loadrite 7400lb dual axle single brake trailer. I'm planning a long distance haul every year and want to get a new trailer. My local Loadrite guy suggested a 8000lb dual axle, dual brake (disk) , torsion suspension, hydralic...

I repowered to a 4 stroke and have all the rigging off my 1999 225 hp OX66 for sale. Everything works but the speed gauge has a slight blemish on the lcd. Pictures are attached , call for pricing. Capt Brian 732 two four five 3816 Attached Images

I have a 1999 2520 MV that had a 225 OX66 2 stroke with a 15 1/2 X 17 SS prop I now have a F250 4 stroke and would like to know if this prop is still the best or has anyone else changed to a better prop. Thanks Capt Brian

I have a 1999 2520 with a 225OX66 25 inch shaft on it. I put on 24 x9 bennet trim tabs and get cavitation in hard turns to port and starboard. I don't know if this was happening before the trim tabs as I installed them as soon as I bought the boat. I'm in the process of repowering and am...

I have a 1999 Yamaha 225hp OX66 25 inch shaft for sale. I'm repowering to a 4 stroke. The motor runs great at all speeds and has a new lower unit WITH A 2 YEAR UNCONDITIONAL WARRANTY. If you run it with no gear oil and it breaks it's covered, get fishing line in the seal, covered, hit...

I recently installed a S1000 on my 1999 2520. I hooked it up via Sea Talk to my E80 w/ Raystar125 Gps Wiring From 125 -green and red together to a 12v switched and fused connection yellow to yellow on ap and e80 browns and blacks together sheilds to ground (no Rf) I cant' get the AP to...

Please see my post under Marine Electronics I could use some input Thanks Capt Brian

My lcd just crapped out on my dash mounted fuel gauge, trip, clock, trim gauge ect on my 1999 2520. If you have one please contact me at 732-245-3816 Thanks Capt Brian

Just put a new Merc Thunderbolt prop on my 1999 225hp OX66. I had to get the hub kit to adapt it to Yamaha. The problem I had was the prop did not go on far enough to get the cotterpin back in with the supplied washer. I had to use a thinner washer from the old prop. I'm talking about the...

I have a 1999 2520 w/ Yamaha 225 OX66 outboard hydrolic steering. E80 Raymarine system with radar Any suggestions for an auto pilot, lokking for something that's easy to use, moderately priced and easy to install. Thanks Capt Brian

Here's a tough one. I have a 1999 2520 w Yamaha 225 OX66. Fish offshore alot, don't ski or tow tubes. What SS prop would you recomend?

I have a 1999 2520 W 225 hp Yamaha OX 66. I've been getting fuel realated engine shut downs out of the blue it just shuts down whenever it feels like. It would start right back up and run fine. Been through the whole fuel system cleaning filters, pulled the fuel rail cleaned everything. Found...

I am repowering from a 1999 Yamaha 225 OX 66 to an 2008 F250 4 stroke. This is not fly by wire so it has cable controls ect. Will my current wiring and guages work with this engine or will I have to put in a new harness, guages ect? If you've done this repower could you please provide any...

Does anyone have a 2520 mod v with a 250 Yamaha or SUzuki 4 stroke? I plan to repower and want a performance report. Mainly interested in off the line acceleration, low rpm planing problems or other performance issues. Have you had any problems with the engine?

I have a 1999 2520 w/yamaha 225 OX 66 Saltwater Want to put on a 4 stroke. Any suggestions? Capt Brian 732-245-3816

Lucky John lived up to his name! I post here about a week ago that I was looking for a crew to go mid week for tuna. I got a couple of responses and Lucky John and I headed out on 8.18 to the tuna grounds. We got there around 0530 to calm seas and perfect weather. After bs'ing on the way out...

Hi I have a 2520 fully rigged for offshore/inshore fishing and like to fish during the week to avoid the crowds. My regular crew has a hard time getting off during the week to fish. Anyone with experience that wants to fish during the week would be welcome. We just split expenses like gas and...

Anybody use Roffs or a similar service for offshore, inshore information? Just trying to find out what works and who to get it from. Any good free sites?

Stainless steel gunwale grab rails with all mounting hardware. $250 or best offer. Located in central NJ. Will ship at your pre paid expense. [/img]